FS: Used SFR Twin Turbo Kit for G35 - Many Upgrades
Thread Starter
Sponsor
Injected Performance
Injected Performance
iTrader: (15)
Joined: Jun 2004
Posts: 636
Likes: 0
From: Houston
We are selling a turbo kit for one of our customers. The kit will be shipped out of our Lexington, KY facility.
Speed Force Racing Twin Turbo Kit - Custom Fit for the G35 with single intercooler
Precision 67mm Turbos x 2
Upgraded Burns Collector Turbo Manifolds x 2
Upgraded Turbo Manifold Coating (has not been installed since coated)
Upgraded Bell Intercooler
Haltech Platinum EMS w/ 1 year warranty
Polished Throttle Body
Polished Coolant, Power Steering, Oil Catch Reservoir
Polished Throttle Body Pipe
Polished Twin Tial BOVs
RC Engineering 1200cc injectors
Upgraded Fuel Rails
Tial 38mm Wastegates x 2
Scavenge Oil Pump
Aluminum Oil Sump for Turbos
Wastegate Dump Tubes
New Air Filters will be provided
Various Lines and Fittings
On a 4.2L Stroker Motor, this kit made 639rwhp (Dyno Dynamics) and 719rwhp Dynojet on pump gas at 19psi. With C16, the kit made 750rwhp (Dyno Dynamics) and was limited to a slipping clutch. This kit will make very good power and was a blast to drive.
Cost to replace this kit would be over $13,000. We are offering this kit for $7,495.



Speed Force Racing Twin Turbo Kit - Custom Fit for the G35 with single intercooler
Precision 67mm Turbos x 2
Upgraded Burns Collector Turbo Manifolds x 2
Upgraded Turbo Manifold Coating (has not been installed since coated)
Upgraded Bell Intercooler
Haltech Platinum EMS w/ 1 year warranty
Polished Throttle Body
Polished Coolant, Power Steering, Oil Catch Reservoir
Polished Throttle Body Pipe
Polished Twin Tial BOVs
RC Engineering 1200cc injectors
Upgraded Fuel Rails
Tial 38mm Wastegates x 2
Scavenge Oil Pump
Aluminum Oil Sump for Turbos
Wastegate Dump Tubes
New Air Filters will be provided
Various Lines and Fittings
On a 4.2L Stroker Motor, this kit made 639rwhp (Dyno Dynamics) and 719rwhp Dynojet on pump gas at 19psi. With C16, the kit made 750rwhp (Dyno Dynamics) and was limited to a slipping clutch. This kit will make very good power and was a blast to drive.
Cost to replace this kit would be over $13,000. We are offering this kit for $7,495.



Last edited by InjectedPerf; May 24, 2011 at 07:43 AM.
ive seen the greddy kit make 750whp dyno jet on c16 and 3.5, shouldn't the combination of the 4.2L and 2 67mm turbos make alot more power? does the kit have some sort of restriction? don't mean to thread jack GLWS. i was just wondering because i have a greddy kit and was hoping to see the 600whp range with no problem.
Last edited by athens2jz; May 7, 2011 at 11:34 AM.
Thread Starter
Sponsor
Injected Performance
Injected Performance
iTrader: (15)
Joined: Jun 2004
Posts: 636
Likes: 0
From: Houston
ive seen the greddy kit make 750whp dyno jet on c16 and 3.5, shouldn't the combination of the 4.2L and 2 67mm turbos make alot more power? does the kit have some sort of restriction? don't mean to thread jack GLWS. i was just wondering because i have a greddy kit and was hoping to see the 600whp range with no problem.







