FS: Partial Speed Force Racing TT kit
#1
Registered User
Thread Starter
iTrader: (5)
Join Date: Jul 2007
Location: CERES CA
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Partial Speed Force Racing TT kit
I have a partial Speed Force Racing TT kit for sale. I say partial because I didn't buy some parts because I was going to peice this kit together. Here is what a complete kit from SFR should consist of: (The things that are in bold is whats for sale)
304SS equal length headers (321 is an option)
Twin 38mm Tial or 35mm Turbonetics Evolution wastegates (I have one Synapse wastegate
twin 60-1 hi-fis(you can basically get a number of configurations of this T3-T4 hybrid if you dont want them this big)
2.5" 304SS downpipes
2" and 3" equal length aluminuim charge pipes
2.75" aluminum intake pipes
Silicon hoses and stainless clamps
K&N airfilters
Massive Spearco intercooler (the G gets two)
440cc injectors
Split Second FTC fuel and timing controller(the same unit Vortech uses)
Walboro 255 fuel pump
Godzilla blow off valve (I have a Synapse BOV)
Mocal oil pump, oil return lines and fittings
Oil pan spacer with oil drain
3-an stainless oil feed lines
Thermotec Heat insulation
Stainless hardware,etc.....
I'm asking $2,000 obo. I think this is a good deal because the rest of the parts besides the oil sump can be bought through G or Z driver way less than retail. If there are any question about the kit please contact me or Turbo Tim at SFR.
304SS equal length headers (321 is an option)
Twin 38mm Tial or 35mm Turbonetics Evolution wastegates (I have one Synapse wastegate
twin 60-1 hi-fis(you can basically get a number of configurations of this T3-T4 hybrid if you dont want them this big)
2.5" 304SS downpipes
2" and 3" equal length aluminuim charge pipes
2.75" aluminum intake pipes
Silicon hoses and stainless clamps
K&N airfilters
Massive Spearco intercooler (the G gets two)
440cc injectors
Split Second FTC fuel and timing controller(the same unit Vortech uses)
Walboro 255 fuel pump
Godzilla blow off valve (I have a Synapse BOV)
Mocal oil pump, oil return lines and fittings
Oil pan spacer with oil drain
3-an stainless oil feed lines
Thermotec Heat insulation
Stainless hardware,etc.....
I'm asking $2,000 obo. I think this is a good deal because the rest of the parts besides the oil sump can be bought through G or Z driver way less than retail. If there are any question about the kit please contact me or Turbo Tim at SFR.
Last edited by BLACK-G35TT; 11-08-2011 at 10:00 AM.
Trending Topics
#8
Hey my name is louis Guzman i am really interested in your intercooler with the piping kit and also the headers(Turbo manifold) with the down pipes too. Thanks lg
Last edited by LgJr; 12-04-2011 at 07:11 AM.
Thread
Thread Starter
Forum
Replies
Last Post