It’s time to move on to a new project so I’m letting go of my Greddy TT kit, built motor and my work S-1 rims . The kit is an 18G kit with the 20G flow upgrade from FP. The kit is still on the car and will be taken off and shipped when sold. The turbo’s got rebuilt about 8 months ago but have been on the car for 2 months. The turbos have about 50 miles on them. The motor was built and installed the same time as the turbo’s and has 50 miles on it also. I’m asking 12k for all three plus shipping and paypal fee.

Motor parts list /For sale Separate $5000
Eagle H rods
WISECO 8.8 Pistons
ACL race bearing rod, main and thrust
ARP head studs
Cometic Head Gasket
Rev up oil pump
Port and polish heads by G&G
TOMEI 264 cams with 10.5 lift
Unorthodox Racing aluminum crank pulley
CJM Stage 0 Return Fuel System

Wheels / For Sale Separate $2,500----SOLD
Black Works S-1 3PC
19 x 9.5 , 19 x 10.5

Greddy TT Kit / For Sale Separate $4500---SOLD
Everything but the normal greddy down pipes and coolant tank I have AAM 3in DP and a smaller coolant tank
RC 1000cc injectors with clips
Haltech ECU
AEM wideband
HKS Sequential Blow-Off Valve
AVR-C boost controller

I know I’m leaving out some things but that’s the meet of it. Any questions PM me.

 

Did u blow the trans? How much whp were you sitting on with this kit

 

Yes I did blow the trans. This is the second turbo kit on this car. The TN kit I had on first started it and this kit took it out. At like 8.5 PSI this kit was making 385 - 400WHP the TQ would start to get up around 380 then just slip and fall off.

 

What exhaust were you running? And by any chance are you trying to sell that as well?

 

It’s the HKS knock off and it has a new home already.

 

may want the greddy kit, ill let u know

 

I'm very interested in the engine and the work wheels!! Pm me for pricing. Thanks!

 

All PM’s replied to.

 

trades for your wheels?

 

All PM’s replied to. This is not a OBO sale ,I think I am giving a great deal on the things I am selling so please STOP LOW BALLING ME. If you don't have the funds wait till you do and if I still have the items then you can get them.

Thanks for looking.

 

BUMP

 

How much for the Greddy kit?

 

Boost anybody?

 

got damnit!! im not finish with my engine yet. i would be to the bank in a heartbeat for the turbo kit, but gotta take things one step at a time and not overwhelm myself. hope a deal like this surfaces around july/august, when i expect to be ready to buy kit and drop in.

Here is my build thread:
https://my350z.com/forum/forced-indu...n-fun-fun.html

goood luck with sale. Its sounds like a great deal

 

Some pictures of the intercooler and gauges. I know the pic's came out sideways just turn your head.

 

What are the offsets on the Meisters?

 

how much power this beast lay down?"

 

My tranny went out and it would not hold anything over 400HP, 380TQ and that’s at 8psi. I wanted to run between 14-18psi with this kit.

 

They are 19x9.5+24/19x10.5+23 Yes they will clear a BBK. I know for a fact they clear stoptech.

 

All PM’s replied to.