Ladies and gents, I have decided to move to the S&R single turbo kit for the HR/VHR because it benifits my cars purpose better.

So, I am selling my Greddy Twin Turbo "HR" kit with the 20G's upgraded with 60-1 compressor wheels and upgraded thrust bearings. These were last serviced about 6 months ago!

The kit also includes the extended capacity oil pan, 2 Turbosmart Raceport BOV's, the Tial wastegates with 7lb springs, K&N air filters and the intercooler.

The turbo's have the DEI Titanium blankets on them (one has been worn by the steering column), the headers and downpipes are also completely wrapped with DEI titanium heat wrap.

For those who don't know, we have made over 1,000whp with this kit (it was probably closer to 1,200whp but the dyno hard drive skipped) at 29PSI.

We made 650whp at 14psi on pump, 805 at 15psi on Q16, and 940whp at 22psi on Q16. Obviously this will vary build to build but the larger flowing compressor wheels greatly contribute to this.

The piping and intercooler are powder coated green but can easily be stripped and re-powdercoated fairly cheap. The drivers side pipe to the throttlebody has had the powdercoat scuffed a little by a braided line but again, a strip and re-powder coat is cheap.

For the kit, including all mentioned above, the price is $5,500 w/shipping, no paypal fee's.

There is a good $14,000.00 worth in this "PROVEN" kit so the price is extremely good.

The kit comes off the car thursday so it could ship Friday or Monday!

Any questions, let me know. Below are some images.

 

very interested... i have a stock block and dont want to do internals. Can i use this kit and just run 8psi of boost?

 

Nice numbers and Z.
Glws

 

Lmao.


That's an amazing price.

 

Yes if you have a hr z

 

Your response is more "lmao" Then his question.

Bump for a cool guy.

Chris

 

The wastegate springs are 7lb so you can run as little as that or as much as 14lb. If you want more, just add larger springs.

However, as Frosty said, as long as you have an 07 or 08 350Z. This kit will not fit a DE.

Also, if you do have an HR, you can run more than 8 and still have a huge safety margin.

 

I'll trade you a 98 Nissan frontier Mint condition plus 1k

 

While I am not against the idea of trades and trades + cash, I am not a truck person, especially if it doesn't have a V8. Plus I have an Armada anyway.

I appreciate the offer though!

 

well it was worth a try lmao

 

You never know if you don't ask......

 

where are the pictures?

 

good guy and great kit seen it in action many times. If only I have not been putting so much into my Z with seats cages and brakes...

 

Hey! Wondering where you have been.... Did I see your wheels for sale on the local z club?

 

yup you did I want to get a squared 10 front and rear set up with some 18inch wheels. I will probably stick with the GTC 01 models though. I just drove a friends Z with asquared setup and it feels way different (better)

 

bump

 

Price reduced! I don't want this thing sitting around on a garage floor!

 

Did you sell it Yet?...pm me no **** with the updated price and well talk for sure

 

It's still available. Lots of interest but nothing solid yet.

 

So what wuld be needed for a complete kit ready to bolt on?
Ems
Fuel pump
Injectors
What else??