FS: PART OUT! Greddy Twins, Injectors, ECU, etc.......
#1
Registered User
Thread Starter
iTrader: (8)
Join Date: Apr 2006
Location: South FLA
Posts: 1,413
Likes: 0
Received 0 Likes
on
0 Posts
PART OUT! Greddy Twins, Injectors, ECU, etc.......
With new babies on board I simply dont have time for the car as i thought i would. All parts are in good condition - All parts were disassembled by Hal/Crew @DYNOSTY (except Cobb/Profec boost controller). Parts located in South Florida Area. NO TRADES!!!!!! Serious buyers only please.... If PM is full email me/contact me at : pfrance757@yahoo.com
Greddy Twins Kit SOLD
Greddy EVOTT Exhaust SOLD
PRO-EFI 128 Box w/harness, Can guage, and Can Cable SOLD
Fuel Injectors 2100cc $450
Plenum 5/16th Spacer SOLD
Oil Catch Can SOLD
Rare JDM Cover SOLD
Greddy Profec E-01 Boost Controller SOLD
Mishimoto Fans $50
Z Speed Under shroud SOLD
COBB Accessport SOLD
Fuel Injectors 2100cc (Fuel Injector Clinic)
Mishimoto Cooling Fans (NEW)
Greddy Twins Kit SOLD
Greddy EVOTT Exhaust SOLD
PRO-EFI 128 Box w/harness, Can guage, and Can Cable SOLD
Fuel Injectors 2100cc $450
Plenum 5/16th Spacer SOLD
Oil Catch Can SOLD
Rare JDM Cover SOLD
Greddy Profec E-01 Boost Controller SOLD
Mishimoto Fans $50
Z Speed Under shroud SOLD
COBB Accessport SOLD
Fuel Injectors 2100cc (Fuel Injector Clinic)
Mishimoto Cooling Fans (NEW)
Last edited by IslandZavage; 02-04-2013 at 02:35 PM.
#7
hatersgonnahate
iTrader: (162)
2 things
the price on the Evo tt is way too low! That is a fairly rare, discontinued exhaust2.
you should probably mention that the greddy pipes are not stock greddy pipes and that the user should know how to install a kit before tackling this.
the price on the Evo tt is way too low! That is a fairly rare, discontinued exhaust2.
you should probably mention that the greddy pipes are not stock greddy pipes and that the user should know how to install a kit before tackling this.
Trending Topics
#8
Registered User
Thread Starter
iTrader: (8)
Join Date: Apr 2006
Location: South FLA
Posts: 1,413
Likes: 0
Received 0 Likes
on
0 Posts
Price too low? isnt that a good thing?
Are you referring to the Greddy Turbo kit pipes? The intake pipe to the plenum is only non-stock pipe. I didnt like the look of the stock one and wanted to add my Tial BOV to it with a cleaner look!! Its looks way better than the stock pipe. the 90 degree elbow (connects to the intercooler) is stock but i had the BOV removed and had it welded back closed as i wanted to relocate the BOV to the intake pipe.
And the pipes connected to the Greddy turbos are the AAM 3inch down pipes )Jet coated), and the Greddy waste gates are connected to the AAM open dumps (Jet Coated)! Im including the original waste gate pipes as i wont need them (not shown).
Hope that clears things up a bit. Sorry for the confusion, but thanks for pointing that out
Last edited by IslandZavage; 12-29-2012 at 06:01 PM.
#11
Registered User
Thread Starter
iTrader: (8)
Join Date: Apr 2006
Location: South FLA
Posts: 1,413
Likes: 0
Received 0 Likes
on
0 Posts
Greddy kit was uninstalled by HAL@Dynosty! aside from intake pipe (pix above) kit pipes are original Greddy! Nothing special done, just wanted a cleaner looking intake pipe. Intake pipes fits same as stock intake pipe. Only difference is im throwing in a Tial BOV with it!
#14
hatersgonnahate
iTrader: (162)
Thanks for the comments and pointing that out.
Price too low? isnt that a good thing?
Are you referring to the Greddy Turbo kit pipes? The intake pipe to the plenum is only non-stock pipe. I didnt like the look of the stock one and wanted to add my Tial BOV to it with a cleaner look!! Its looks way better than the stock pipe. the 90 degree elbow (connects to the intercooler) is stock but i had the BOV removed and had it welded back closed as i wanted to relocate the BOV to the intake pipe.
And the pipes connected to the Greddy turbos are the AAM 3inch down pipes )Jet coated), and the Greddy waste gates are connected to the AAM open dumps (Jet Coated)! Im including the original waste gate pipes as i wont need them (not shown).
Hope that clears things up a bit. Sorry for the confusion, but thanks for pointing that out
Price too low? isnt that a good thing?
Are you referring to the Greddy Turbo kit pipes? The intake pipe to the plenum is only non-stock pipe. I didnt like the look of the stock one and wanted to add my Tial BOV to it with a cleaner look!! Its looks way better than the stock pipe. the 90 degree elbow (connects to the intercooler) is stock but i had the BOV removed and had it welded back closed as i wanted to relocate the BOV to the intake pipe.
And the pipes connected to the Greddy turbos are the AAM 3inch down pipes )Jet coated), and the Greddy waste gates are connected to the AAM open dumps (Jet Coated)! Im including the original waste gate pipes as i wont need them (not shown).
Hope that clears things up a bit. Sorry for the confusion, but thanks for pointing that out
I want that upper pipe btw!
Yeah just thought it would be good to mention. Will the stock strut bar work with that pipe?
Trust me, i sell to a lot of people on here and answer a lot of tire kicker questions.
Yeah, sell the evo-tt for more else i would be tempted to buy it just cause! Bet you get a tire kicker that wants it for 400 shipped or some ridiculous price.
GLWS! sorry to see ya part out.
#16
Registered User
Thread Starter
iTrader: (8)
Join Date: Apr 2006
Location: South FLA
Posts: 1,413
Likes: 0
Received 0 Likes
on
0 Posts
Sorry for the late replies! I'm with my kid at the hospital and will follow up with everyone as soon as I can! Sorry for the inconvenience! Thanks for the interest!!!!