FS: Vortech V-2 Kit w/ Si Trim & extras for Non-Rev
#1
Registered User
Thread Starter
iTrader: (9)
Join Date: Aug 2004
Location: Austin/Dallas, TX
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
Vortech V-2 Kit w/ Si Trim & extras for Non-Rev
****SOLD******
Selling my Custom Vortech Supercharger setup. I finally pulled it out of the car. Made 431 whp with stock motor. This setup is installed in a 2004 G35, but it is actually a 350z Kit.
Vortech Si Trim Blower
Vortech Tuner Satin Kit
3.12 Pulley
Custom Pulley Mod
Uprev Osiris Pro *Tuned by Uprev's Jared - Cable included
DW 600cc Injectors
Walbro Fuel Pump with the CJ mod (Trade with your stock)
HPX MAF Sensor
APS Oil Pan
Zeitronix Wideband Kit with Boost Sensor
Autosport Wiring Harness
$4500 for everything
This comes with a APS oil Pan, so no need to tap the oil pan. The kit has about 17k on it and it's probably time for a rebuild. Comes with all the hardware and new hoses. PM me with any questions.
Selling my Custom Vortech Supercharger setup. I finally pulled it out of the car. Made 431 whp with stock motor. This setup is installed in a 2004 G35, but it is actually a 350z Kit.
Vortech Si Trim Blower
Vortech Tuner Satin Kit
3.12 Pulley
Custom Pulley Mod
Uprev Osiris Pro *Tuned by Uprev's Jared - Cable included
DW 600cc Injectors
Walbro Fuel Pump with the CJ mod (Trade with your stock)
HPX MAF Sensor
APS Oil Pan
Zeitronix Wideband Kit with Boost Sensor
Autosport Wiring Harness
$4500 for everything
This comes with a APS oil Pan, so no need to tap the oil pan. The kit has about 17k on it and it's probably time for a rebuild. Comes with all the hardware and new hoses. PM me with any questions.
Last edited by whoojong; 04-20-2013 at 07:08 PM. Reason: SOLD!
#4
Registered User
iTrader: (1)
Join Date: Nov 2010
Location: Palmdale (the trap)
Posts: 326
Likes: 0
Received 0 Likes
on
0 Posts
interested in pricing for possible part out...
parts wanted....
-all piping
-all brackets
-nuts & bolts for install
-all pulleys
-oil return
-oil feed
do not need blower, fuel pump, uprev, injectors or anything else ...
please let me know!
thanks
parts wanted....
-all piping
-all brackets
-nuts & bolts for install
-all pulleys
-oil return
-oil feed
do not need blower, fuel pump, uprev, injectors or anything else ...
please let me know!
thanks
Trending Topics
#9
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
If your willing to part with the oil pan , let me know. I have a Greddy pan I could send you, so you kit will still require no tapping of block.