FS: COMPLETE 350z HR nitrous kit
Thread Starter
Registered User
Joined: Aug 2010
Posts: 77
Likes: 0
From: Alabama
COMPLETE 350z HR nitrous kit
I have spent 2 years piecing together this kit with all the best bells and whistles making sure my set up would be safe and reliable, and it is just that. I doubt you will find a more complete set up for sale. All the hard work is done for you, trust me this was a major headache trying to get every piece to wire and work together, etc. I have numerous wiring diagrams, some even color coded. I have every instruction manual for all of these pieces as well. This makes it a straight bolt on kit with no mess or aggravation for you. I do not plan on parting the kit, would rather wait for someone looking for a whole kit ready to go.
The kit will stay on my car until I have a buyer ready to pay and they are then willing to give me 2-3 days to take it all off and box it up for shipping. That being said, here are the parts it comes with and their original prices:
Dynotune 350z HR kit = $549
Fuel line adaptor = $79
Dynotune Round Digital Nitrous Pressure Gauge = $179
Dynotune Round 2-1/16" Nitrous Switch Center = $149
Crawford 350Z Nav Cubby Gauge Pod = $35
Dynotune Bottle Heater = $129
Dynotune Two Hole Gauge Adaptor 4 or 6AN Blue Swivel = $16
Dynotune blow down kit = $39
Dynotune remote bottle opener w/ handle = $219
Harris Speed Works Microedge controller = $170
2x 5ft purge lines = $60
Dynotune master blaster purge solenoid = $89
2x dynotune purge led mounts = $78
2x dynotune purge led’s = $98
T fitting for purge = $3
I may be missing some things, not really sure I will check tomorrow.
All this came off an 07 350z HR, but it will work with any z/g for that matter, just take off the t fittings and only use 1 nozzle for the single intake cars.
I'm not sure if I can find the other jets, but the ones that are in each intake are: .034 nitrous and .018 fuel. This is a 50 shot according to dynotune's calculator in each intake, resulting in a 100 shot on dual throttle body cars. My car went from 305hp/278tq on the dyno to 367hp/357tq with these jets. You can use an online calculator and figure out which jets you want for more or less power (just make sure you get "flare" jets).
The total of the parts listed new would be almost $2,000 plus shipping. Since this kit has already been installed and put together it will be much easier for the next owner (you won't have to spend hours trying to figure out what goes where). I'm not looking to give this away, I know what it is worth and it is all in perfect working condition. I have only ran one full bottle through it including dyno tuning. I'm looking for $1550 plus shipping pretty much firm which I feel is very fair for both of us, I would have JUMPED on this deal if it were around when I was looking and all the work was done for me already.
The kit will stay on my car until I have a buyer ready to pay and they are then willing to give me 2-3 days to take it all off and box it up for shipping. That being said, here are the parts it comes with and their original prices:
Dynotune 350z HR kit = $549
Fuel line adaptor = $79
Dynotune Round Digital Nitrous Pressure Gauge = $179
Dynotune Round 2-1/16" Nitrous Switch Center = $149
Crawford 350Z Nav Cubby Gauge Pod = $35
Dynotune Bottle Heater = $129
Dynotune Two Hole Gauge Adaptor 4 or 6AN Blue Swivel = $16
Dynotune blow down kit = $39
Dynotune remote bottle opener w/ handle = $219
Harris Speed Works Microedge controller = $170
2x 5ft purge lines = $60
Dynotune master blaster purge solenoid = $89
2x dynotune purge led mounts = $78
2x dynotune purge led’s = $98
T fitting for purge = $3
I may be missing some things, not really sure I will check tomorrow.
All this came off an 07 350z HR, but it will work with any z/g for that matter, just take off the t fittings and only use 1 nozzle for the single intake cars.
I'm not sure if I can find the other jets, but the ones that are in each intake are: .034 nitrous and .018 fuel. This is a 50 shot according to dynotune's calculator in each intake, resulting in a 100 shot on dual throttle body cars. My car went from 305hp/278tq on the dyno to 367hp/357tq with these jets. You can use an online calculator and figure out which jets you want for more or less power (just make sure you get "flare" jets).
The total of the parts listed new would be almost $2,000 plus shipping. Since this kit has already been installed and put together it will be much easier for the next owner (you won't have to spend hours trying to figure out what goes where). I'm not looking to give this away, I know what it is worth and it is all in perfect working condition. I have only ran one full bottle through it including dyno tuning. I'm looking for $1550 plus shipping pretty much firm which I feel is very fair for both of us, I would have JUMPED on this deal if it were around when I was looking and all the work was done for me already.
Last edited by AT1222; May 5, 2013 at 06:57 AM.
Thread Starter
Registered User
Joined: Aug 2010
Posts: 77
Likes: 0
From: Alabama
Updated price because I sold the extra bottle locally, and I will more than likely be keeping the intakes for my next project. Someone buy this go fast juice, it will definitely put a smile on your face!
