FS: Vortech V2 Supercharger kit 03-05 VQ35DE UPGRADED + EXTRAS!!!
#1
Banned
Thread Starter
Join Date: Mar 2011
Location: florida
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Vortech V2 Supercharger kit 03-05 VQ35DE UPGRADED + EXTRAS!!!
My 350 was unfortunately involved in a rear end collision consequently totaling the car, since it wasn’t insured for the aftermarket parts I’m selling my vortech kit from the car. The supercharger was rebuilt when the engine was built and has approx. 5K miles on the rebuild. Fuel rails and 850CC were also installed at that time. The car was previously running on the stock fuel rails with the walbro 255, 928 impeller, 2.87 pulley, 440CC injectors. This is the tune currently on the Utec. I had upgraded the fuel system to the Cosworth rails, 850CC, walbro 400, Uprev Maf, and plenum spacer, this was tuned on a different ecu when the car was hit. With methanol this kit has been proven to make up to 500whp. Asking $4000 shipped. I will accept paypal, verified seller.
Vortech v2sc supercharger kit 03-05 VQ35DE 350Z/G35
Deatschwerks 850CC injectors (in rails)
COSWORTH Fuel Rail kit
Aeromotive fuel regulator
GTM Tensioner pulleys (already on bracket)
928 Motorsports upgraded impeller (installed in supercharger)
Original impeller included
Walbro 255 fuel pump
Turbo XS Utec (has tune for 440CC injectors with walbro 255 and stock rails)
UPREV GT Maf sensor
Vortech 2.87 pulley
AAM Plenum Spacer
Deatschwerks 440CC injectors
Spearco Intercooler
All intercooler piping
Vortech v2sc supercharger kit 03-05 VQ35DE 350Z/G35
Deatschwerks 850CC injectors (in rails)
COSWORTH Fuel Rail kit
Aeromotive fuel regulator
GTM Tensioner pulleys (already on bracket)
928 Motorsports upgraded impeller (installed in supercharger)
Original impeller included
Walbro 255 fuel pump
Turbo XS Utec (has tune for 440CC injectors with walbro 255 and stock rails)
UPREV GT Maf sensor
Vortech 2.87 pulley
AAM Plenum Spacer
Deatschwerks 440CC injectors
Spearco Intercooler
All intercooler piping
#4
Very interested and in Miami
Hi, I am very interested in the kit. I live in Miami, and am open to pickup depending on where in florida you live. I see one of the intercooler piping is slightly damaged...(small dents)
Jus wanted to know if everything needed for installation is present. Such as bolts,brackets,etc...
If you can give me your number that would be great too. (easier to comunicate)
Thanks.
- Chris
Jus wanted to know if everything needed for installation is present. Such as bolts,brackets,etc...
If you can give me your number that would be great too. (easier to comunicate)
Thanks.
- Chris
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
350Z_Al
Exterior & Interior
133
10-29-2020 07:44 PM
seagrasser
Zs & Gs For Sale
6
10-11-2015 03:27 PM