FS: Greddy 18G Twin Turbo 4400$ shipped. Fresh rebuilt turbos 0 Miles
Thread Starter
New Member
Joined: Jun 2007
Posts: 220
Likes: 5
From: Seattle
Greddy 18G Twin Turbo 4400$ shipped. Fresh rebuilt turbos 0 Miles
greddy 18g twin turbo kit for sale. 4400$ shipped. Will discount if picked up. In Seattle WA
freshly rebuilt turbos from turbo city in anaheim ca. 0 miles on turbos after rebuild. Bought the kit used and the seller did not know how many miles were on the kit so just to be safe I went ahead and had them rebuilt.
will come with two brand new intercoolers measuring 17.5"x7". was going to do a custom setup like the jwt
kit was missing gaskets as well as oil feed lines and other misc hardware so i purchased all new pieces from greddy.
i can include r35 570cc injectors INCLUDED!
there is a hairline crack starting to form on one of the exhaust manifolds which is common with greddy. this can be welded.
SOLDDDDDDDDDDDDDDDDDDDDDD
freshly rebuilt turbos from turbo city in anaheim ca. 0 miles on turbos after rebuild. Bought the kit used and the seller did not know how many miles were on the kit so just to be safe I went ahead and had them rebuilt.
will come with two brand new intercoolers measuring 17.5"x7". was going to do a custom setup like the jwt
kit was missing gaskets as well as oil feed lines and other misc hardware so i purchased all new pieces from greddy.
i can include r35 570cc injectors INCLUDED!
there is a hairline crack starting to form on one of the exhaust manifolds which is common with greddy. this can be welded.
SOLDDDDDDDDDDDDDDDDDDDDDD
Last edited by .cakestar; Jul 16, 2015 at 02:12 AM.
Registered User
Joined: Apr 2011
Posts: 46
Likes: 1
From: Porter Beach, Indiana
GReedy Twin Turbo kit
Would you describe the engine for which this kit is intended?
You have written that GReedy mani cracks are common and that it can be welded. I'm assuming these manis are made of cast iron?
Is the kit intended for a motor with specific modifications?
You have written that GReedy mani cracks are common and that it can be welded. I'm assuming these manis are made of cast iron?
Is the kit intended for a motor with specific modifications?
Thread Starter
New Member
Joined: Jun 2007
Posts: 220
Likes: 5
From: Seattle
This kit is made for the vq35de engine so 03-06 g35/350z. The manifolds are indeed cast iron.
Thread Starter
New Member
Joined: Jun 2007
Posts: 220
Likes: 5
From: Seattle
yes, as stated I was going to do a custom setup for my G similar to the JWT dual intercooler setup so you will need to have a few cold pipes fabbed up or go with a different intercooler. I am just including them with the sale
