Does anyone know which pins on the serial cable that the R4 software uses for the 4 Aux. inputs as well as the ground? I am going to try to wire my Wideband, EGT and Fuel pressure into it them. This should give me more than enough info to finally tune the motor.

 

Think your best bet...would be to call Split Second . They always seem to be real helpful when we have called them [949-863-1359]

 

If you find this out I'll be your groupie for life.

--Steve

 

Yeah, I am going to call Split Sec when they open. I was hoping that someone here had already attempted it. This does not seem all that difficult to do.

 

seems a hub of sorts would be needed....

i know SS has other modules and connects, so MAYBE..... (and maybe you'll have a lifetime groupie to boot!)

-eS

 

Well, I spoke to Split Second and what I hoped to do cannot be done with the unit that ships with the Vortech kit. The data for the 4 Aux. channels comes from the Split Second FTC box itself. If I wanted to do this I would need a new FTC box with data acquisition added. I would have to get this through Vortech. Split Second did say that they would be more than happy to work with me and Vortech on this but, I really don't feel that it would be worth the expense or hassle. If I would have specified this when I ordered the kit, the upgrade probably would have been fairly cheap.

 

Crap. I figured as much. I'm still interested, however.

--Steve