Notices
Intake Exhaust Moving all that air in and out efficiently

Who has the Veilside or RSR Exmag II exhausts available????

Thread Tools
 
Search this Thread
 
Old Aug 14, 2005 | 02:23 PM
  #21  
dank311's Avatar
dank311
Registered User
iTrader: (8)
 
Joined: Jun 2003
Posts: 563
Likes: 0
From: Cordova, TN
Default

lovetoclown, yea, that is what I have been hearing about the fuji exhaust alot. Its the only thing that is making me lean towards the HKS exhaust. I have heard a few clips of the fuji on a red Z that I have liked. I believe he had HF cats, and Y pipe. The only exhaust that is close to it, that I have heard in person, is the nismo exhaust w stock cats. It sounds nice, but I wouldnt mind if it was SLIGHTLY louder. How loud would the fuji be if I added HF cats and Y-pipe? Would it be just as loud as the HKS or nismo with stock cats? (Ypipe included on the nismo, of course) But I don't want something overly loud like the Topspeed proN1/RSR style exhausts. I have a friend that has the Topspeed with HF cats, ypipe, and headers, and it is absolutely rediculous. He likes, it but its definately not for me. Also, how would the HKS sound when HF cats are added? would it be as loud as the nismo or fuji w/ HF cats?
Reply
Old Aug 14, 2005 | 03:05 PM
  #22  
lovetoclown's Avatar
lovetoclown
Thread Starter
Registered User
iTrader: (1)
 
Joined: Dec 2003
Posts: 736
Likes: 0
From: reno
Default

I have DC headers, R/T Cats, Nismo Y-pipe and the Fujitsubo exhaust. It is only a little louder than stock. No rasp though. I have heard that the HKS is VERY loud with Hi-Flow Cats. I have heard the HKS and to me is sounded gurgly at idle. Almost like it was under water. I do not know if it was the old style or the new dual style though. ONe of the most restricted parts on the exhaust is the cats and if you change them out, then most exhaust systems will get twice as loud.
Reply
Old Aug 14, 2005 | 06:02 PM
  #23  
dank311's Avatar
dank311
Registered User
iTrader: (8)
 
Joined: Jun 2003
Posts: 563
Likes: 0
From: Cordova, TN
Default

how loud would you say your exhaust setup compares to the HKS or nismo with stock cats? Does the fuji not get any louder than either of those two exhausts with all those mods? Im just trying to see if I get the fuji exhaust and get a ypipe and HF cats, if it will be just as loud as the nismo or HKS exhaust with stock cats...
Reply
Old Aug 14, 2005 | 07:00 PM
  #24  
lovetoclown's Avatar
lovetoclown
Thread Starter
Registered User
iTrader: (1)
 
Joined: Dec 2003
Posts: 736
Likes: 0
From: reno
Default

I would say that the Fujitsubo with cats is a hair louder than the nismo with stock cats. I beleive the nismo get really loud with cats. I don't know about the HKS though.
Reply
Old Aug 15, 2005 | 11:26 AM
  #25  
INTENSEPOWER's Avatar
INTENSEPOWER
Vendor - Former Vendor
iTrader: (208)
 
Joined: Dec 2004
Posts: 2,038
Likes: 0
From: Arizona
Default

Originally Posted by Bubble
hey D,

how much for JIC Ti Single 3"? any link to it?
Alex,

This one: http://www.intensepower.com/jicmagsparde.html .
Reply
Old Aug 15, 2005 | 11:35 AM
  #26  
INTENSEPOWER's Avatar
INTENSEPOWER
Vendor - Former Vendor
iTrader: (208)
 
Joined: Dec 2004
Posts: 2,038
Likes: 0
From: Arizona
Default

Originally Posted by zownz
I heart Intense...just thought i share that
zeek, 1 word: issues
Reply
Old Aug 15, 2005 | 11:38 AM
  #27  
INTENSEPOWER's Avatar
INTENSEPOWER
Vendor - Former Vendor
iTrader: (208)
 
Joined: Dec 2004
Posts: 2,038
Likes: 0
From: Arizona
Default

Originally Posted by dank311
Thanks 1ntense
Your review did help me out. From the sound clips I have of the veilside, it sounds exactly how you stated. Deep all the way through the rev range. I didnt know how hard he is revving in the video,(I thought he maybe wasnt revving it all the way up b/c it sounded soo deep), but I guess its just the sound of the veilside. But, I am personally looking for something stockish sounding, but a little deeper, louder, and somewhat exotic sounding. The veislide is a nice looking piece though. But, from the sound of things, it looks like I might be going with the HKS, or possibly the fuji.
NP! Well, my opinion is HKS then. It's very exotic sounding and true dual. The only issue is that you will wait a good 6-8 weeks to get one . Glad I could help!
Reply
Old Aug 15, 2005 | 04:00 PM
  #28  
lovetoclown's Avatar
lovetoclown
Thread Starter
Registered User
iTrader: (1)
 
Joined: Dec 2003
Posts: 736
Likes: 0
From: reno
Default

1ntenze I sent you a pm.
Reply
Old Aug 15, 2005 | 04:30 PM
  #29  
INTENSEPOWER's Avatar
INTENSEPOWER
Vendor - Former Vendor
iTrader: (208)
 
Joined: Dec 2004
Posts: 2,038
Likes: 0
From: Arizona
Default

Hello. Yes, I recieved it. Katsu, at VeilSide USA is getting ahold of VeilSide Japan this week to get a difinitive answer. Until they get an answer from Japan, I cannot guarantee the October ETA. Thanks for the PM.
Reply
Old Aug 15, 2005 | 04:34 PM
  #30  
lovetoclown's Avatar
lovetoclown
Thread Starter
Registered User
iTrader: (1)
 
Joined: Dec 2003
Posts: 736
Likes: 0
From: reno
Default

Great thanks. I will check back later in the week unless I hear from you first.
Reply
Old Aug 15, 2005 | 04:40 PM
  #31  
INTENSEPOWER's Avatar
INTENSEPOWER
Vendor - Former Vendor
iTrader: (208)
 
Joined: Dec 2004
Posts: 2,038
Likes: 0
From: Arizona
Default

Sounds good.
Reply
Old Aug 18, 2005 | 04:05 PM
  #32  
lovetoclown's Avatar
lovetoclown
Thread Starter
Registered User
iTrader: (1)
 
Joined: Dec 2003
Posts: 736
Likes: 0
From: reno
Default

Any new info for me on this????????????
Reply
Old Aug 19, 2005 | 03:28 PM
  #33  
lovetoclown's Avatar
lovetoclown
Thread Starter
Registered User
iTrader: (1)
 
Joined: Dec 2003
Posts: 736
Likes: 0
From: reno
Default

Bump
Reply
Old Aug 19, 2005 | 03:31 PM
  #34  
INTENSEPOWER's Avatar
INTENSEPOWER
Vendor - Former Vendor
iTrader: (208)
 
Joined: Dec 2004
Posts: 2,038
Likes: 0
From: Arizona
Default

Originally Posted by lovetoclown
Bump
Patience please. VeilSide USA has not received word yet from Japan. I will let you know when they do. Thanks!
Reply
Old Aug 20, 2005 | 09:28 AM
  #35  
Faizei's Avatar
Faizei
Registered User
 
Joined: Apr 2005
Posts: 133
Likes: 0
From: Seattle, WA
Default

Darren,

Can you PM the price for the RSR Exmag GT2 exhust and how long I would have to wait to get one? Does it come with all of the gaskets? If you can give me a special deal, I will take both the exhust and the Fuji Y-Pipe. I am ready to place the order.

Thanks in advance.
Reply
Old Aug 22, 2005 | 05:36 PM
  #36  
INTENSEPOWER's Avatar
INTENSEPOWER
Vendor - Former Vendor
iTrader: (208)
 
Joined: Dec 2004
Posts: 2,038
Likes: 0
From: Arizona
Default

Originally Posted by lovetoclown
Any new info for me on this????????????
Per VeilSide USA, there will not be a shippment for the Ti exhaust in the October container. VeilSide USA does not know when the next shippment will be. Sorry for the bad news. Please let me know if there's anything else that catches your eye. Thanks again!
Reply
Old Aug 22, 2005 | 05:37 PM
  #37  
INTENSEPOWER's Avatar
INTENSEPOWER
Vendor - Former Vendor
iTrader: (208)
 
Joined: Dec 2004
Posts: 2,038
Likes: 0
From: Arizona
Default

Originally Posted by Faizei
Darren,

Can you PM the price for the RSR Exmag GT2 exhust and how long I would have to wait to get one? Does it come with all of the gaskets? If you can give me a special deal, I will take both the exhust and the Fuji Y-Pipe. I am ready to place the order.

Thanks in advance.
James,

Thanks for the call today. D.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sales@czp
Engine
33
Sep 23, 2019 03:30 PM
Justin100
Intake Exhaust
26
Nov 29, 2015 03:58 PM
Dymsi
Exterior & Interior
14
Sep 29, 2015 11:32 AM
Li1ag
Exhaust
1
Sep 28, 2015 02:07 PM




All times are GMT -8. The time now is 07:00 AM.