350zz053

iTrader: (8)

Good mod or no? Anyone have it? and is it safe for the engine? thanks!!

SpeedRcr

iTrader: (5)

I got one free and put it on...I had a helix power tower on my other cars I noticed a gain as well

teh215

iTrader: (8)

Exactly what good is a throttle body spacer supposed to do? Sounds like another $100 part that yields 10 unverifiable horsepower.

Audible Mayhem

iTrader: (48)

throttle body spacers have been used on american cars for a while now, i would like to test one out on a dyno to see what happens...


its pretty much the same idea as the turbonator, it spins the incoming air, blah blah blah.

one day i will just sit on a dyno for hours testing all this crap

edwin350z

iTrader: (23)

had this on my chevy truck and it sounded kool, alot of people would ask if it was supercharged... not too sure if it works though since i had so many mods done at the same time it was hard to notice which ones worked the best

SpeedRcr

iTrader: (5)

no its not the same as a turbonator...the spacer first increases air volume, second it spins the air after the throttle body not before like the turbonator, and third they have been dynoed on other cars and have shown gains

nator's z

So is there actually one made for the Z or do we have to rig one ourselves. I'm game!!

i8acobra

iTrader: (6)

The "spiraling" of some of the TB spacers does nothing.

On a motor with TB injection, the spacer helps with fuel atomization, wheter it has spirals or not. If it's made from resin, it also keeps the TB cooler. On a car with multi-point injection, the only thing the spacer does is increase the volume of the plenum. This is good for top end power because there is more air in the plenum to feed the motor. Again, if it's made from resin, it also keeps the TB cooler. It does nothing for atomization, even if it has spirals. On a VQ motor, a plenum spacer does the same thing, only much better.

HyperSprite

iTrader: (6)

I could see how this mod might work (the spacing of the TB, not the twist) on particular TB setups, but without it being tested specifically on the Z, who knows what it could do.

I have seen them in the JCW,

http://www.jcwhitney.com/autoparts/P...729011/c-10101

They also sell

http://www.jcwhitney.com/autoparts/P...729011/c-10101


http://www.jcwhitney.com/autoparts/P...729011/c-10101


http://www.jcwhitney.com/autoparts/P...729011/c-10101


http://www.jcwhitney.com/autoparts/P...729011/c-10101

JCWhitney, for all your Sport Compact needs!

Chris

Mike@Altered

iTrader: (5)

We make a throttle-body spacer for the 350Z & G35. One of the many new nifty parts we have that nobody knows about unless they stop over

On the 350Z we haven't seen any significant power gains, maybe 1/2 hp or so depending on the car.

The main reason why we made the throttle body spacer was to allow our customers to better plumb their turbo vaccum lines with out having to tapping the factory plenum, which is prone to cracking over time.

Here is a picture:

teh215

iTrader: (8)

Really?

SpeedRcr

iTrader: (5)

helix makes one for the g/z list on it is 60 retail is around 100

KONVERTER

iTrader: (2)

think of it as adding more volume to the upper plenum... like a plenum spacer but not adding as much...

IMHO - something else to make a buck off of...

If your going to put a spacer anywhere... put it on the Plenum like the Motordyne etc or do a full upper plenum replacement (Crawford / APS etc)...

With the throttle placement on the Z, it does not function like it does on other motors...

QuadCam

iTrader: (8)

sweet pic,

DanielW

iTrader: (27)

maybe I'll get you guys to put one one when I come get my reflash next month