Amuse titanium intake pipe. Here are some pix. Its specifically sold for the 350z and I have a g35, I'm not sure if it will fit w/out an extra sleeve or something. I guess there is only one way to find out if there is a difference in size b/w the g and z air inlet pipe... box came w/ the intake pipe, some hardware (4 clamps and what looks like 2 samco like rubber hosings, ad for titan exhaust, but no instructions.

 

On a Sunday??? WTF I hate you!! Ima go check my mail now.. lol

 

I kno right? I thought the post never delivers on a sunday? Boy was I surprised and pleased. hope u get urs soon bro

 

I checked my mail.. nothing from USPS

 

Does this part replace the "z tube" or something else?

 

Very pretty. Where do you connect the MAF sensor?

 

Are you god?? JW.. still fuking boggled on how you got a delivery on a sunday .. I was also looking at that intake.. and thinking thats not gonna work... .... Unless your supposed to connect it after the Maf..

 

So is this picture misleading?:
http://www.bulletproofautomotive.com....jpg&item=5620

What else do I need to make it work like the pictures suggest? Is this a usdm/jdm thing? The pipe is made specifically for the vq35de. That would suk if I just had an expensive piece of titanium to use as a paperweight.

 

Don't you use the stock Z tube which houses the MAF. This Amuse thing seems to replace just the big plastic portion of the whole intake deal leading to the throttle body.

 

I vote for paperweight.. Looks like ur gonna have to call them and blast them for 1. Not sending instructions, 2. How the hell you gonna run the maf???

 

^^So modification to the z-tube would be necessary to install this? I'm a little confused, it came w/ no instructions or pictures or anything like that

 

+1

 

Brb.. Gonna do some research for you..

Here ya go.. Just pull the plastic shiet out..... and throw on the SS piece.. too easy.. Sorry bout the other info.. Just havent had an intake for a long time..

http://www.350ztech.com/zwiki/Image:POPCHARGER005.jpg

http://www.courtesyparts.com/Merchan...Code=Z3303-JWT

 

From the pic provided by bulletproof it looks like the old Injen intake which you would have to use the stock Z tube to house the MAF. The Amuse portion should just adapt to the stock Z tube without a problem.

 

That must be where it goes. Thanks. If it too long, cut it with a hacksaw. If its too short, get a longer rubber hose connector.

 

^^So the amuse pipe connects directly to the manifold and the car stays stock from the z-tube back? And no cutting/welding should be necessary?

 

so the maf readers comes off of the z-tube?

 

Lmao try this

http://www.*********.com/zwiki/Image:POPCHARGER005.jpg Throw 350z - tech where them stars are.. For some reason its being blocked....

 

Is this a typo or were you drunk when you placed your order?

 

Actually no, the reason I thought it would be impossible is because where my maf is mounted on the SC piping.. But as I said before NA is different and the intake piping is straight to the end.. then the maf.. then the filter..

http://www.courtesyparts.com/Merchan...Code=Z3303-JWT

If you look at this popcharger the maf is on that small piping portion.. Hence all the wiring around the filter and if you look right under the dipstick its about two inches below it in the picture.... Im sure if you actually open your hood and grab your screwdriver this install will be easier than taking a ****..