Yikes! Muffler discoloration can't be good.
08-10-2009, 10:50 AM
#25
Administrator
iTrader: (25)
08-11-2009, 07:51 AM
#26
Yeah, the paint is burning.
The proper way to do that is to polish it down if you want it to look like a Nismo exhaust. I had an OEM exhaust as a polishing project, but it just isn't of the quality where the polish came out good. There's a lot of little divots in the metal plus the welds were a little uneven- looked better with the underside painted black.
If I were you, I'd find an OEM exhaust muffler in your area and just swap it out- you may be able to find one for free from a member. If you don't do that, you can always just take the muffler off, strip the paint off, then spray it with some high-temp flat black and be done with it.
The proper way to do that is to polish it down if you want it to look like a Nismo exhaust. I had an OEM exhaust as a polishing project, but it just isn't of the quality where the polish came out good. There's a lot of little divots in the metal plus the welds were a little uneven- looked better with the underside painted black.
If I were you, I'd find an OEM exhaust muffler in your area and just swap it out- you may be able to find one for free from a member. If you don't do that, you can always just take the muffler off, strip the paint off, then spray it with some high-temp flat black and be done with it.
Last edited by cheshirecat79; 08-11-2009 at 07:52 AM.
Thread
Thread Starter
Forum
Replies
Last Post
