Kinetix composite manifold, questions...
#1
Registered User
Thread Starter
Join Date: Mar 2010
Location: Fort Lauderdale, FL
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Kinetix composite manifold, questions...
anybody have experience or know of pros and cons for this. i came across a killer deal on it and even though i have a stock engine i dont think i can pass up this quick deal. anybody know of any power gains for this on a stock engine? would it also be a good time to install a motordyne spacer while im down there too?
#4
New Member
iTrader: (24)
First go to the Discussion Forums link at the top and click on it. Then click on search. Then type in the subject your searching for and search. It's better than asking around because your just going to get a bunch of moron replies. Unless you ask a interesting question of course.... I will tell you that you wont need a spacer with the Kinetix plenum, and based on the engine your Z is equipped you might be interested in the Motordyne Mrev2.
There was a shootout dyno done on a bunch of plenums that Modified Mag did I'm pretty sure. I read the article. I learned from that article that the Kinetix plenum makes decent power. I have one on my Z (rev-up) I like it and would recommend you purchase one if you can get a good deal.
There was a shootout dyno done on a bunch of plenums that Modified Mag did I'm pretty sure. I read the article. I learned from that article that the Kinetix plenum makes decent power. I have one on my Z (rev-up) I like it and would recommend you purchase one if you can get a good deal.
Thread
Thread Starter
Forum
Replies
Last Post
Colombo
Forced Induction
35
11-09-2020 10:27 AM