sinasajadi

iTrader: (5)

Hey guys,

I was wondering if anyone is able to help me piece together the hardware required to install my used nismo exhaust.

I purchased the exhaust used so it did not include any of the hardware.

The bolts/screws I can get from home depot for under $5
But the 3 gaskets and 1 o ring I am having some trouble locating.

Has anyone tried piecing this kit together themselves. If so please tell me where you bought these gaskets and how much they cost.

( I do not want to pay $70 for 4 gaskets)

Here is the link to the entire kit:

http://www.thenismoshop.com/ikorb.ph...oduct_id=12350

Thanks for your help people

Vas_Z33

iTrader: (39)

go to auto parts store and call it a day

Waiz

iTrader: (57)

The ones that OP posted are Nismo branded thus their cost.

kramykram

iTrader: (135)

goto napa and get a paper/metal gasket. it will seal the spot where the oring goes just fine. you will have to dremel it out a bit with a grind stone but works great.

350ZthatsMe

iTrader: (10)

you can run it without the o-ring gasket... you can also reuse your oem gaskets and cut the opening a bit for better flow... that's what I've done without any problems!

cdoxp800

iTrader: (12)

2.5 Gasket. for cats to y-pipe. Qty 2
http://www.amazon.com/Vibrant-1457-2.../dp/B001804UBG

3.0 Gasket for Y-pipe to mid-pipe. Qty 1
http://www.amazon.com/Vibrant-1458-2.../dp/B000E43BDK

As for the o ring gasket I have yet to find one. I have even been to a few exhaust shops.

sinasajadi

iTrader: (5)

THANK YOU cdoxp800 I will go ahead and buy those gaskets from amazon. but in the listing it never specifies the diameter, how do I know it is 2.5'' and 3'' ?

as for the o ring. I was told midas might be have one. so Ima try there and let you know if I got lucky.

cdoxp800

iTrader: (12)

This will help you on the gasket sizing

http://vibrantperformance.com/2010_c...logue_pg35.pdf

Vibrant 1457 = 2.5
Vibrant 1458 = 3.0

swatcsj

iTrader: (2)

is it metal gasket?