When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
no one is owned here. Maybe u should buy a HR y pipe and replace it with ur current then do before and after dynos and see if YOU have the same results. I did this at CIN Motorsports and LOST HP but gained 2tq. So def not owned son. Dont speak about stuff u dont have experience with
Megan Y-pipe is 2.5" inlet and 3" out I just measured mine.
Hmmm...what did you measure it with? I measured mine with a caliper and it came out to 2.31" exactly which would round out to 2.25. The collector on the header measured 2.26". I'll check again today to see if maybe I screwed up.
I was thinking about grabbing a megan racing y-pipe since they *should* bolt right up to my LTH and work well with the n1...
Just wondering if spending $150+ on it is worth the hassle...
If you wanted, if you didn't live to far away, I could lend you my HR Y-pipe and you could try it versus a Megan or whatever you wish to buy. Honestly, I could understand if you're on a budget, but for $300-ish, you could get the AAM and it's a quality product.
If you wanted, if you didn't live to far away, I could lend you my HR Y-pipe and you could try it versus a Megan or whatever you wish to buy. Honestly, I could understand if you're on a budget, but for $300-ish, you could get the AAM and it's a quality product.
