Custom stainless steel single exhaust
#41
Registered User
Thread Starter
Just for you HRmoneypit, a resonator!
The first production exhaust is in route!
Tacked together and checked for perfect fitment
Keep an eye out in the classifieds for this one. The moderators have allowed me to fabricate and sell 1 and only 1 exhaust for the time being. Because this is technically a one off custom part, it will be priced as such. If it wasn't for everyones positive comments and interest, I wouldn't be taking this as seriously as I am right now. I already have an inquiry out to become a vendor here. Let's hope the fee isn't a deal breaker for me! Cheers everyone
The first production exhaust is in route!
Tacked together and checked for perfect fitment
Keep an eye out in the classifieds for this one. The moderators have allowed me to fabricate and sell 1 and only 1 exhaust for the time being. Because this is technically a one off custom part, it will be priced as such. If it wasn't for everyones positive comments and interest, I wouldn't be taking this as seriously as I am right now. I already have an inquiry out to become a vendor here. Let's hope the fee isn't a deal breaker for me! Cheers everyone
The following 2 users liked this post by venture210:
HRMoneyPit (05-11-2016),
SilverGLE (05-10-2016)
#42
New Member
What does this weigh? I'm all for your custom stuff but I remember your price was pretty close to the Tomie of my dreams lol
#45
New Member
And made of car superior materials lol not trying to diss your work cause you definitely put in the time just asking
#46
Registered User
Thread Starter
No I didn't take any offense! I'm well aware of Tomei's quality. That's my favorite exhaust of all time for this car lol being titanium, I expect it to be super light. I was suprised that mine is only 6 lbs heavier!
#47
New Member
Yeah definitely not bad. It might sound as good with the resonator now too
How do you think it effected sound?
How do you think it effected sound?
#48
Registered User
Thread Starter
Well I haven't had the chance to do a sound test just yet. I'm currently waiting for the local gas company to approve me for renting a bottle for argon. Once that happens, I'll get my stuff all setup to finish welding in my garage. Then, my buddy is going to take some pictures and video clips for some fancy advertisement. Playing the waiting game sucks lol
#51
Registered User
Thread Starter
... Just might be crazy enough to work haha
Update: haven't figured out the gas situation completely yet but I was able to weld the mid-pipe with the remaining gas from the shop. Quite an improvement from the original
Update: haven't figured out the gas situation completely yet but I was able to weld the mid-pipe with the remaining gas from the shop. Quite an improvement from the original
The following 2 users liked this post by venture210:
HRMoneyPit (05-18-2016),
SilverGLE (05-23-2016)
#52
New Member
Oh Das pretty
#55
New Member
That sounds really good
#56
Registered User
Thread Starter
dboyzalter, haha can you teach me to internet
The v-band welds came out decent. I still have a long way to go for doing all the butt joints in the piping though. When mating two pieces of pipe together, it's hard to get them perfectly concentric. Often, the mandrel bent sections are slightly oval'd so there's never a perfect fit
This time around, I clamped another v-band to the flange being welded to prevent warping. I test fit the new exhaust and the flanges went together much better than on the first design. I need to make more so I can keep progessing
The v-band welds came out decent. I still have a long way to go for doing all the butt joints in the piping though. When mating two pieces of pipe together, it's hard to get them perfectly concentric. Often, the mandrel bent sections are slightly oval'd so there's never a perfect fit
This time around, I clamped another v-band to the flange being welded to prevent warping. I test fit the new exhaust and the flanges went together much better than on the first design. I need to make more so I can keep progessing
Last edited by venture210; 05-25-2016 at 10:08 AM.
#58
New Member
Now make it out of pie cuts!
#60
Registered User
Thread Starter
No.3 has just been completed. This one is already intended for someone and is not for sale. Just taking a little pride in my work and showing it off is all. The weld quality is getting closer to where I want it to be. Still minor imperfections everywhere but also MUCH better than when I first started welding. Cheers everyone!
The following 3 users liked this post by venture210: