10mm socket INSIDE my hatch...
Thread Starter
Registered User
iTrader: (4)
Joined: Oct 2004
Posts: 737
Likes: 0
From: Downingtown, PA
10mm socket INSIDE my hatch...
how the hell am i going to get this thing out...?
it fell off the damn wrench when released it from the nut and is now lodged at the corner of the hatch by the side window.
happened when screwing in my stock spoiler. F#%*!!!!
any suggestions other than removing the whole hatch assembly?
it fell off the damn wrench when released it from the nut and is now lodged at the corner of the hatch by the side window.
happened when screwing in my stock spoiler. F#%*!!!!
any suggestions other than removing the whole hatch assembly?
Registered User
Joined: May 2004
Posts: 112
Likes: 0
From: Georgia
A magnet.
Put tape (or a shop rag) on a strong magnet so you don't scratch paint. Place magnet on inside surface of hatch but close to where socket is. Once you have captured socket with magnetic attraction, slide magnet slowly over to an area where you can grab socket.
Put tape (or a shop rag) on a strong magnet so you don't scratch paint. Place magnet on inside surface of hatch but close to where socket is. Once you have captured socket with magnetic attraction, slide magnet slowly over to an area where you can grab socket.
Thread
Thread Starter
Forum
Replies
Last Post
Justin100
Intake Exhaust
26
Nov 29, 2015 03:58 PM
350Z Project X
Suspension
9
Oct 10, 2015 09:23 AM
abarclay
Wheels Tires
4
Sep 21, 2015 04:51 AM