aireq

So I've been having trouble with my power seats. See this post

https://my350z.com/forum/maintenance-and-repair/343865-can-t-move-drive-seat-back-forward.html

I ended up unplugging everything (including the air bag line) and removing the seat. I wanted to test everything before I put the seat back in so I ended up running wires from the 12V source coming out of one of the plugs on the floor to my seat outside the car. I turned the car on while the airbag was unplugged, which is why I'm guessing that my airbag light wont stop flashing even though it's plugged back in.

How do I reset it so that the red light stops flashing?


Eric

unit5alive

Probably have to go to the dealer as most of the small code scanners won't do abs or air bag resets , some of the bigger independents have the snap-on machines that will reset your light , a good rule of thumb is to leave the battery disconnected for 1/2 hour before unplugging any air bag connectors , most air bag circuits have yellow connectors or tape on them , Craig.

SoldzMyZ

iTrader: (11)

search the forums to reset the airbag light switch. Just went through this the other day. I guess some bumps trigger it.