Hi,

I own a 2005zr touring and recently swapped out my stock wheels with 20" axis 7 mod's (used) the tires are weird config being that they are all the same for all 4 wheels 255/35/20

setup
Front
Size: 20x9.0
Offset: et37
Tire: 255/35/20

Rear
Size: 20x10
Offset: +38et
Tire: 255/35/20

I don't have brembo breaks, when i installed the front wheels i notice a extra bolt that I eventually removed to get my wheels to fit. I have no idea what this is...


Any ways, i put all 4 wheels on the car, made sure all tires are 35psi

when i drive now every once in a while i will see a "!" exclamation mark light up on my dash... any help would be appreciated

 

the bolt is so you don't put rear tires on the front

 

Either your new wheels don't have the tire pressure sensors in them and if they do they need to be calibrated!

 

would this light go off because i did not transfer the tps sensors from my old to new wheels?

btw I didn't do this..

 

What does your manual say about “!” ?

 

Yes. The sending units are in the original wheels. Without the sending units TPMS does not work.