I am not sure where to post this but I am in need of desperate help. I have taken all the proper steps needed to take out my open diff pumpkin to swap it with another pumpkin. There is only one problem. I have a stripped nut that I need to take out, and the reason it is hard because it is in such an awkward place.

Here is some pics that I jacked from another thread:





Please some give me some advise, or let me know if there's a tool I can use. Thanks!

 

go down to your local tool store and pic up a striped nut remover set don't know what there called they all have different names but they work great Ive used them on many of my classic car projects were striping nuts is part of the game or twisting them off

here is a link to a set i have they work great http://www.sears.com/shc/s/p_10153_1...ord=strip+nuts

 

oh you are so ****ed.

those nut strippers don't fit in the hole. nor do you have an angle to have any leverage to drive them on.

 

 

Ha yah I am kinda screwed. Those nut strippers can't go deep enough.

 

dame thats sucks i thought it might help

 

NP thanks for the suggestion!

 

torch and reinstall new rubber bushing.....

remove nut with diff out...

-J

 

what ever happened here OP? you get it fixed up?
-J