Notices
Maintenance & Repair 350Z up keep and diagnosing/fixing problems

TPMS turn ignal indicators high beam indicators blank

Thread Tools
 
Search this Thread
 
Old Mar 9, 2010 | 11:15 PM
  #1  
mattyusaf's Avatar
mattyusaf
Thread Starter
Registered User
 
Joined: Mar 2010
Posts: 3
Likes: 0
From: Pittsburgh
Default TPMS turn ignal indicators high beam indicators blank

I installed aftermarket led taillights and had to cut and splice one wiring harness now my tpms gauge blinks and is blank, my high beam indicator doesn't work and my green turn signal bulbs don't work on steering column. I took it to nissan they charged me 200 fixed nothing and told me they would have to rip apart my dash and test all voltages with no time estimation nor cost estimation. All of this sounds so severe and not needed please help i would be so appreciative u r the only people i can trust thank you for any help.
Reply
Old Mar 9, 2010 | 11:32 PM
  #2  
billsrcursed's Avatar
billsrcursed
Registered User
 
Joined: Sep 2008
Posts: 671
Likes: 0
From: Orlando, FL
Default

Dude there's roughly 1 kagillion threads regarding issues with led tails and the problems they cause.

Search and destroy, good luck....
Reply
Old Mar 10, 2010 | 03:24 AM
  #3  
DavesZ#3's Avatar
DavesZ#3
350Z-holic
Premier Member
20 Year Member
iTrader: (26)
 
Joined: Jul 2003
Posts: 15,887
Likes: 23
From: Louisiana
Default

Originally Posted by mattyusaf
I installed aftermarket led taillights and had to cut and splice one wiring harness now my tpms gauge blinks and is blank, my high beam indicator doesn't work and my green turn signal bulbs don't work on steering column. I took it to nissan they charged me 200 fixed nothing and told me they would have to rip apart my dash and test all voltages with no time estimation nor cost estimation. All of this sounds so severe and not needed please help i would be so appreciative u r the only people i can trust thank you for any help.
Undo what you did and see if the old lights work again. If they do, then your changes were wrong. If they don't work, then you've screwed up either the harness or the BCM (body control module- $$$$)
Reply
Old Mar 10, 2010 | 05:54 AM
  #4  
Brrcats's Avatar
Brrcats
Registered User
iTrader: (10)
 
Joined: Jan 2007
Posts: 2,370
Likes: 0
From: Westerville, OH
Default

Did you disconnect the battery before working on the wires?

WHen I was messing around hardwiring my excort I blew a fuse which caused those lights to go out on my dash.

I just identified the fuse and replaced with one of the spare fuses.

So check the fusebox by your feet in the driverside.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
hajwoj
Autocross/Road
27
Nov 1, 2015 05:25 PM
aboodi
Forced Induction
8
Oct 28, 2015 02:07 PM




All times are GMT -8. The time now is 09:34 PM.