Think I hurt my Z....help
Mar 22, 2010 | 04:45 PM
Thread Starter
Joined: Dec 2006
Posts: 53
Likes: 0
From: Orlando Fl
Think I hurt my Z....help
Did a break job and long story short my right rear axel got pushed in toward the diff about 1 to 1.5 inches. I pulled it back out with the axle nut ...again dont ask why it was off. Everthing went back nicely. I am now having this odd sound coming from the right rear. Cant place whether maybe I over adjusted the parking break pads or if I hurt something when the axle was pushed in. Help an ideas?? Oh and it is a rotational noise
Mar 22, 2010 | 06:11 PM
Joined: Sep 2003
Posts: 2,402
Likes: 14
From: hilliard ohio
Brake job consisted of what? I am assuming you pulled the rotors for turning/replacing but can't figure out how you moved the axle since the rotors pretty much pop right off without tools/force. Can you make the long story short just a bit longer?
Mar 22, 2010 | 06:12 PM
Joined: Apr 2005
Posts: 10,944
Likes: 1
From: Carbon Fiber, TX
Mar 22, 2010 | 06:34 PM
Thread Starter
Joined: Dec 2006
Posts: 53
Likes: 0
From: Orlando Fl
Like i said dont ask yes it was rotors, pads and a fluid flush. Like i said dumb move on how it happened u think i hurt anything.
Mar 22, 2010 | 06:42 PM
Joined: Apr 2005
Posts: 10,944
Likes: 1
From: Carbon Fiber, TX
Yes, it is hurt!!
Mar 22, 2010 | 07:05 PM
Joined: Dec 2003
Posts: 529
Likes: 0
From: Chicago
Should have done a brake job instead. Something always goes wrong when you do a break job.
Mar 22, 2010 | 07:48 PM
Joined: Apr 2008
Posts: 1,907
Likes: 0
From: manorville ny
was changing the brakes so easy you decided oh hell while the wheels off might as well change the axles?
Mar 22, 2010 | 07:54 PM
Thread Starter
Joined: Dec 2006
Posts: 53
Likes: 0
From: Orlando Fl
can we focus on the issue at hand. what could would have happened. Would it have pushed into the diff or just damage the half shaft.
Mar 22, 2010 | 07:58 PM
Joined: Aug 2009
Posts: 1,974
Likes: 3
From: San Diego
Quote:
Originally Posted by
Sirk17
Like i said dont ask yes it was rotors, pads and a fluid flush. Like i said dumb move on how it happened u think i hurt anything.
I'm soooo calling CPS on you... Car Protective Services...
**Dialing**
Mar 22, 2010 | 08:09 PM
Joined: Jun 2004
Posts: 42,753
Likes: 11
From: Tucson, AZ
This is like Dont ask dont tell.
Mar 22, 2010 | 08:09 PM
Thread Starter
Joined: Dec 2006
Posts: 53
Likes: 0
From: Orlando Fl
Dear god...what could this have hurt?
Mar 22, 2010 | 08:16 PM
Thread Starter
Joined: Dec 2006
Posts: 53
Likes: 0
From: Orlando Fl
Dear god...what could this have hurt?
Mar 22, 2010 | 08:57 PM
Joined: Feb 2009
Posts: 409
Likes: 1
From: Morgan Hill
Quote:
Originally Posted by
derek173
Should have done a brake job instead. Something always goes wrong when you do a break job.
lolz
Mar 24, 2010 | 08:57 AM
Joined: Jul 2008
Posts: 3,817
Likes: 1
From: new york
pretty easy to diagnose a noise that cannot be heard and u are the only one hearing..
Mar 24, 2010 | 09:10 AM
Joined: Jan 2006
Posts: 899
Likes: 0
From: St. Louis
so you come here asking for help and advice, and don't want anyone to ask you questions?
Mar 24, 2010 | 09:44 AM
Joined: Jun 2008
Posts: 459
Likes: 0
From: B-Town
Quote:
Originally Posted by
derek173
Should have done a brake job instead. Something always goes wrong when you do a break job.
I laughed
Mar 24, 2010 | 11:07 AM
Thread Starter
Joined: Dec 2006
Posts: 53
Likes: 0
From: Orlando Fl
The question is what sort of damage could have been done by having the axle push towards the differential approximately 1 to 1.5 inches.
Mar 24, 2010 | 11:11 AM
Joined: Aug 2008
Posts: 7,418
Likes: 13
From: Long Island, NY
Probly damaged the spider gear in the diff. Sounds like a good time for a quaiffe/cusco. No idea how this could happend but Id love to hear it.
This happend on my eclipse from a car accident. How this happens on a brake job is LMFAO
Mar 24, 2010 | 11:54 AM
Joined: May 2009
Posts: 356
Likes: 0
From: SW.Oklahoma/N.Texas
hope im not driving in front of you someday......
Mar 24, 2010 | 06:04 PM
Joined: Nov 2008
Posts: 185
Likes: 0
From: Burlington
I bet he took a sledge to the rotor to get it off when it didn't come off easily because of the parking brake shoes.