Notices
Maintenance & Repair 350Z up keep and diagnosing/fixing problems

04 350z p0327 knock sensor

Old Jul 24, 2010 | 09:36 AM
  #1  
shiftzimportz's Avatar
shiftzimportz
Thread Starter
Registered User
 
Joined: May 2008
Posts: 6
Likes: 0
From: DELTONA
Unhappy 04 350z p0327 knock sensor

my 04 z has about 79k miles recently i noticed that its very laggy rpms are struggling to move alltogether car falls flat on its face i changed the knock sensor and i have read the other post about other users but cant find out what solved there problem i called everything nissan and they said only 03 models have the sub harness for the knock sensor and 04 up its tied into the main harness which nissan wants 800+ for any ideas i would appreciate it greatly the z is 6spd and has injen coldair intake test pipes and x02 exhaust
and i can drive lol if you can text i would appreciate anytime is fine 386-561-1735 sorry if i posted incorrectly its my first time


thanks in advanced
Reply
Old Jul 24, 2010 | 09:47 AM
  #2  
Dr. Venture's Avatar
Dr. Venture
Registered User
iTrader: (19)
 
Joined: Apr 2008
Posts: 2,697
Likes: 3
From: Dirty Jersey
Default

why would you assume it was a knock sensor? Nissans always have "knock sensor" ghost codes regardless.

Perhaps you need the MAF sensor due to the CAI it may have gotten h20 inside of it.


There is also a TSB on fuel system psi. Check into that.

Last edited by Dr. Venture; Jul 24, 2010 at 09:48 AM.
Reply
Old Jul 24, 2010 | 11:06 AM
  #3  
shiftzimportz's Avatar
shiftzimportz
Thread Starter
Registered User
 
Joined: May 2008
Posts: 6
Likes: 0
From: DELTONA
Default

idk reading other posts

Last edited by shiftzimportz; Jul 24, 2010 at 11:10 AM.
Reply
Old Jul 24, 2010 | 11:09 AM
  #4  
shiftzimportz's Avatar
shiftzimportz
Thread Starter
Registered User
 
Joined: May 2008
Posts: 6
Likes: 0
From: DELTONA
Default

i have taken it to nissan and did a diagnostic vacuum test and sensor check the car came back with no issues or known sensor failure also did a timing check and everything came back on spec i used my obd 2 to clear the code and the car felt completely different but it kept coming back i would clear it and it would work for a few days and come back now when i clear it it wont go away idk nissan also replaced the maf but it did no difference this was here before i installed the intake i actually purchased that intake thinking stock intake was chocking the car due to testpipes and exhaust but i was wrong
Reply
Old Jul 26, 2010 | 09:39 AM
  #5  
Dr. Venture's Avatar
Dr. Venture
Registered User
iTrader: (19)
 
Joined: Apr 2008
Posts: 2,697
Likes: 3
From: Dirty Jersey
Default

I suggest you do a fuel psi test. at idle w/ vacuum the psi should be (kg/cm2) 51/3.7.

so 51 lbs.

check that and get back to us.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
etkms
Engine & Drivetrain
29
Jun 19, 2022 06:30 PM
350Z Project X
Maintenance & Repair
11
Oct 17, 2015 05:16 PM
RyansZ33
Maintenance & Repair
8
Sep 15, 2015 05:54 AM
speedsniper
Engine
5
Sep 14, 2015 08:46 AM


Thread Tools
Search this Thread

All times are GMT -8. The time now is 02:01 PM.