Notices
Maintenance & Repair 350Z up keep and diagnosing/fixing problems

Help!...engine studdering at WOT

Thread Tools
 
Search this Thread
 
Old Apr 10, 2011 | 04:45 PM
  #1  
trefling's Avatar
trefling
Thread Starter
Registered User
iTrader: (3)
 
Joined: Dec 2004
Posts: 396
Likes: 0
From: Kansas City
Default Help!...engine studdering at WOT

Went to the track last summer, it was hot! Maybe around 105 outside.


About a half way down the track I was told a little puff of black smoke came out and from that point anytime I was driving the engine would start studdering around wide open throttle.

It does not matter is I turn the boost down to 6 psi or 16psi. Car runs great otherwise, its only at WOT where there is problems. Its also fine if it's in boost.

I replaced all the ignition coils, spark plugs and gaped them to proper clearances.

Mods:
Greddy TT
fully built engine
HKS VPro


Everything was fine before I went to the track.

Ran a scanner and the following codes came up:
P2135 (Throtal/pedal position sensor switch)
P0223
P0123


Lots of smart guys here, please help..Thank you
Reply
Old Apr 10, 2011 | 05:08 PM
  #2  
trefling's Avatar
trefling
Thread Starter
Registered User
iTrader: (3)
 
Joined: Dec 2004
Posts: 396
Likes: 0
From: Kansas City
Default

anyone?
Reply
Old Apr 10, 2011 | 05:35 PM
  #3  
bluelineshooter's Avatar
bluelineshooter
New Member
 
Joined: Jun 2009
Posts: 786
Likes: 0
From: Missouri
Default

Sounds terminal. Trade it in on a GT-R
Reply
Old Apr 10, 2011 | 06:02 PM
  #4  
trefling's Avatar
trefling
Thread Starter
Registered User
iTrader: (3)
 
Joined: Dec 2004
Posts: 396
Likes: 0
From: Kansas City
Default

sorry, not the answers I was looking for
Reply
Old Apr 10, 2011 | 06:13 PM
  #5  
Nexx's Avatar
Nexx
New Member
iTrader: (41)
 
Joined: Jun 2005
Posts: 13,654
Likes: 8
From: DFW
Default

does the same to me sometimes when i do a pull starting in 3rd, not all the time just every once and awhile.
Reply
Old Apr 10, 2011 | 06:17 PM
  #6  
SparkleCityHop's Avatar
SparkleCityHop
Living in 350Z
Premier Member
iTrader: (30)
 
Joined: May 2009
Posts: 4,293
Likes: 2
From: Spartanburg(SparkleCity), SC
Default Throttle Sensor

I'm sure you already checked, but the other two codes are throttle sensor related as well.

P0223 Throttle/Pedal Position Sensor/Switch B Circuit High Input
P0123 Throttle/Petal Position Sensor/Switch A Circuit High Input
Reply
Old Apr 11, 2011 | 01:54 PM
  #7  
ed@aph's Avatar
ed@aph
Vendor - Former Vendor
iTrader: (1)
 
Joined: Mar 2009
Posts: 494
Likes: 0
From: Toronto
Default

one of my customer brought his car into my shop couple weeks ago with a p2135 and p2138 code. replaced accel pedal asem with new tps on it, works fine now after tps re-learn. didnt happen to see the other 2 codes you mentioned thou.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
FromGtoZ
Intake Exhaust
2
Sep 20, 2015 03:41 PM
pdexta
New Owners
6
Sep 14, 2015 11:27 AM
Bigsyke
Engine & Drivetrain
11
Sep 11, 2015 06:19 PM
t32gzz
Tuning
13
Mar 17, 2004 06:14 PM
richhoward
2003-2009 Nissan 350Z
23
Jan 24, 2004 03:20 PM




All times are GMT -8. The time now is 06:23 AM.