I changed my clutch around 2 weeks ago. I have so far but 450 miles it is a good exedy clutch. The dealer also did not change the flywheel which was weird to me. Now to the problem before I changed the clutch it had this problem about 25% through the shift the clutch gets stuck. You could press on it to change gears but it will come back to the stuck spot. Now the next problem During the first 5 days the clutch was extreamly strong to push down and heavy now 2 weeks later the resistance is minimal to push the clutch. Anyone have an idea for either problem?

 

Clutch slave cylinder most likely...

 

Also, go ahead and change your trans and clutch fluid just to be safe. Good luck.