Front hub assembly will not come off!!
01-29-2013, 01:12 PM
#1
Registered User
Thread Starter
iTrader: (1)
Join Date: Sep 2012
Location: gallatin tn
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Front hub assembly will not come off!!
Hey,
I have to change my hub assembly because mine is bent and makes my wheel wobble... I took the wheel brake caliper and rotor off. I also took off the four bolts that hold the assembly on the spindle... Now I can't get the hub assembly off.. It is stuck in there!! I tried hitting it with a hammer, also tried putting nuts back o ( not all the way) with. The socket on the nuts and hit them with the hammer but it does not move at all ... Any suggestion?
I have to change my hub assembly because mine is bent and makes my wheel wobble... I took the wheel brake caliper and rotor off. I also took off the four bolts that hold the assembly on the spindle... Now I can't get the hub assembly off.. It is stuck in there!! I tried hitting it with a hammer, also tried putting nuts back o ( not all the way) with. The socket on the nuts and hit them with the hammer but it does not move at all ... Any suggestion?
01-29-2013, 04:56 PM
#2
Registered User
Thread Starter
iTrader: (1)
Join Date: Sep 2012
Location: gallatin tn
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
car does not drive straight after wreck...
I got it out by putting the wheel back on and kicking the hell out of it!
Last edited by waikiki35; 01-29-2013 at 04:58 PM.
Thread
Thread Starter
Forum
Replies
Last Post
