Optimal reading for temperature gauge on dash?
Hi everyone,
I recently got a coolant change and the shop used 80% coolant/20% water. I bought my Z only a month back and I don't remember what the temperature gauge on the dash used to be.
Right now, It's a little below the halfway point about a 40 out of 100 (100 being H). It's at that temperature after 10 minutes of driving and stays there and it doesn't fluctuate. I noticed the fan kicks in 30 seconds after the car is still.
Does that sound about right or is it supposed to be lower?
I recently got a coolant change and the shop used 80% coolant/20% water. I bought my Z only a month back and I don't remember what the temperature gauge on the dash used to be.
Right now, It's a little below the halfway point about a 40 out of 100 (100 being H). It's at that temperature after 10 minutes of driving and stays there and it doesn't fluctuate. I noticed the fan kicks in 30 seconds after the car is still.
Does that sound about right or is it supposed to be lower?
Last edited by OneLovelyZee; Jun 12, 2013 at 08:18 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Colombo
Forced Induction
35
Nov 9, 2020 10:27 AM



