Hey guys,

Im looking to buy a oem replacement undershroud. For some reason the 350z is doubled than the price of a g35 undershroud. They look almost identical. Would it fit? besides drilling new holes. Thanks for the feedback !

 

this is the part

 

Get an aluminum one off ebay, the plastic ones get destroyed almost every year you need to get a new one...
http://www.ebay.com/itm/G35-Brushed-Aluminum-Engine-Splash-Shield-Under-Tray-Cover-Aero-Shroud-BEST-350Z-/161118295378?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3AG35&hash=item2583661552&vxp=mtr
Also, makes changing your oil much faster. Unscrew 3 bolts, drain, fill, done... instead of like 12 bolts.

 

I don't know what you're driving over, but i've been using my stock one for 11 years now.

The stock shroud already has a hole where the oil filter is. If need be, you can trim the hole an extra inch wider for some more clearance. I've never had to remove the shroud to change the oil.

 

I agree, my oem shroud lasted a while. Just had bad luck one time and it got destroyed so I ghetto attached it with zip ties but they eventually ripped. Im just going to buy the g35 one. Thanks guys if you guys want to know fitment let me know.

 

Zspeed undershroud is one of my favorite mods, definitely recommend it instead of the crappy OEM plastic one

https://my350z.com/forum/body-exteri...are-ready.html

Lowered car + aftermarket bumper +daily driving = plastic undershroud got destroyed