Cam Problems
#1
Registered User
Thread Starter
Join Date: Jul 2014
Location: Arizona
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Cam Problems
Alrighty
I got a 06 350
Today it started fumbling when ever id get to 2500-3000rpms
Went and got the codes pulled on it
Had 10
3 of which where pending
P0300-Random/Multi Cylinder Misfire Detected
P0340-Camshaft Position Sensor Circuit Malfunction
P0345-Camshaft Position Sensor "A" Circuit Malfunction
P0011-"A" Camshaft Position-Timing Over Advanced/System Performance (B1)
P0021-"A" Camshaft Position-Timing Over Advanced/System Performance (B2)
P0014-"B" Cam Pos Timing Over Advan Bank 1
P0024-"B" Cam Pos Timing Bank 2
Which pretty much says my intake/exhaust valves are over advanced, causing misfires.
Im thinking it could be either the cam sensors/VVT solenoids are bad or are going bad.
I wanna bust out the DMM and go ham on the connectors
But i cant find any good wiring diagrams any place.
anyone know of a good site to get em?
Or knowledge of the wires and what the are
or have any knowledge of whats going on and what i should do?
Thanks for your time!
I got a 06 350
Today it started fumbling when ever id get to 2500-3000rpms
Went and got the codes pulled on it
Had 10
3 of which where pending
P0300-Random/Multi Cylinder Misfire Detected
P0340-Camshaft Position Sensor Circuit Malfunction
P0345-Camshaft Position Sensor "A" Circuit Malfunction
P0011-"A" Camshaft Position-Timing Over Advanced/System Performance (B1)
P0021-"A" Camshaft Position-Timing Over Advanced/System Performance (B2)
P0014-"B" Cam Pos Timing Over Advan Bank 1
P0024-"B" Cam Pos Timing Bank 2
Which pretty much says my intake/exhaust valves are over advanced, causing misfires.
Im thinking it could be either the cam sensors/VVT solenoids are bad or are going bad.
I wanna bust out the DMM and go ham on the connectors
But i cant find any good wiring diagrams any place.
anyone know of a good site to get em?
Or knowledge of the wires and what the are
or have any knowledge of whats going on and what i should do?
Thanks for your time!
Last edited by Stickyseamen; 07-05-2014 at 06:09 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Lt_Ballzacki
Brakes & Suspension
39
08-06-2021 06:19 AM