Problem with tcs abs slip
03-08-2015, 03:48 PM
#1
Registered User
Thread Starter
Join Date: Aug 2014
Location: Sunnyside Washington
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Problem with tcs abs slip
I just put new wheels on my Z and the tcs slip and abs light stayed on. they are 18x8.5 in the front the tire size is 225/45/r18
And in the rear I have 18x9.5 and the tire size is 235/45/50 so Is the problem with the size of the tires or is it something els?
And in the rear I have 18x9.5 and the tire size is 235/45/50 so Is the problem with the size of the tires or is it something els?
03-08-2015, 04:29 PM
#2
New Member
Your tires sizes are close enough to stock that they are not the problem.
Did you make any other changes, or do anything else?
I would try driving the car around for awhile. The lights may go out after doing this.
Did you make any other changes, or do anything else?
I would try driving the car around for awhile. The lights may go out after doing this.
03-08-2015, 04:48 PM
#3
Registered User
Thread Starter
Join Date: Aug 2014
Location: Sunnyside Washington
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Yeah I lowered the car in the process its on bc racing coilovers but other than that nothing els was done?
03-08-2015, 05:14 PM
#5
Registered User
Thread Starter
Join Date: Aug 2014
Location: Sunnyside Washington
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
Lt_Ballzacki
Brakes & Suspension
39
08-06-2021 06:19 AM