New ECM - Bouncing Revs
Thread Starter
New Member
Joined: Nov 2020
Posts: 6
Likes: 0
From: California
New ECM - Bouncing Revs
2007 350z base model -
I recently got a new ECM from a 2007 350z touring model. I sent it out to UpRev to remove NATS. Once I swapped it into the car, car started up fine but is idling at 2k. Once I perform the idle learning procedure the car bouncing the needle off of 1,500 to 2,000 rpms. Not sure what the issue is now, no code is being thrown currently and the codes as far as I know have not come back up. Previous ECM was limp moding and had an unfixable p0057/p0158 codes.
Thanks for any help/insight!
I recently got a new ECM from a 2007 350z touring model. I sent it out to UpRev to remove NATS. Once I swapped it into the car, car started up fine but is idling at 2k. Once I perform the idle learning procedure the car bouncing the needle off of 1,500 to 2,000 rpms. Not sure what the issue is now, no code is being thrown currently and the codes as far as I know have not come back up. Previous ECM was limp moding and had an unfixable p0057/p0158 codes.
Thanks for any help/insight!
Thread
Thread Starter
Forum
Replies
Last Post
Brayanblanco22
Maintenance & Repair
2
Feb 17, 2020 11:28 AM