^^ yes it recomends an 8-9 i believe but it does mot work either. I bought a 7psi spring and it worked meant!!

 

What recommends an 8-9 psi spring? My current engine vacuum is at -21 in/Hg on idle. Anything lower will just keep the bov open at idle.

I just used this chart.
http://www.tialmedia.com/documents/w3_tial_bov50_sp.pdf

 

they new toy

 

New leather shift boot from JPM Coachworks via Z1 Performance:

 

JPM is good stuff, they did my headliner in Alcantera.

 

tint.

 

Picked up a set of these

 

Technically I got them yesterday. Can't wait till spring to put them on.

 

I forgot. Most likely The thread u read was created by my buddy Mark and 7 is what he came out with and so did my z and it is what i recommend my friends when going FI. The bov wont stay open while on idle, no air escapes or nothing like that. Its all bs. But try ur 8psi and if u dont have surge and got brakes right of boost then u good lol

 

^^^Sick shift boot.

------

Ported and polished heads and shorty headers for my daily

 

Spend less on the C and spend more on the Z.

 

LOL...basically putting Z on hold until I start taking it out to the track again. It's just not practical to drive anywhere especially with my daughter with me pretty much all of the time.

Since the C is driven almost every day, I figured to make it a bit more fun to drive. Although, i'm not sure if the wife will be happy if I decide to get a cam with some lope on it that matches the big valve heads I got that would make it sound like this hahah.

http://www.youtube.com/watch?v=2fRI6...layer_embedded

 

I've unboxed these today:

DynoTune Nitrous Kit


Stance GR+ True Coilovers


SPL PRO Front End Links


SPL PRO Rear End Links


SPL PRO Rear Toe Arms (Bucket Delete)


SPL PRO Rear Lockout Bolts & Washers


350EVO Front Sway Bar


GTSPEC Rear Tie Brace


Akebono 4/2 Calipers, StopTech Slotted Rotors, & Stainless Lines


Still have the following to receive/unbox and install this week:
Kinetix Rear Camber Arms
Kinetix Rear Traction Arms
Kinetix Front A Arms
Hotchkis Rear Sway Bar
NANO 4500 Kit

 

Very nice!

I love my Akebonos!

 

Thanks e30cabrio, I still lick my chops reading your build thread.

I'm kicking myself for not doing all SPL arms, but it was just too much of a price difference from the Kinetix for me to justify right this second. However, the first time one bends, I'll use that as an excuse to replace them with SPL.

 

Bringing it back to the old skool, love 350evo stuff.

 

I still have some 350evo Front A-arms...they are teh sex, but not legal in my race class.

 

I have no class, so I don't have to worry about that.

 

350evo stuff...ah the memories.

 

Damn Hop, Santa came early