if i go with a bigger spacer does that means i need to roll my fenders?

 

In my opinion before a person touches there suspension or wheels one should roll there fenders first. Just to be on the safe side..

With that said yes please roll your fenders, and yea you will have to with spacers.

 

The hub of your wheels stick out more than the spokes...

 

wheels are that way to maximize lip size. its a trade off, do you want your wheels really concave or have a huge lip? you cant have both.

another 10mm on the back would look much more aggressive.

 

i now have 25mm spacers in the back and 15mm in the front. my new offset is +7 front and +10 rear and i'm running tein S-tech. somehow the rear still look high. any idea?

 

s-techs are pretty conservative springs you should look into gf210s or nf210s if you want to be lower. w/o going coilovers

 

Looking better.

I would also recommend some meatier rear tires as well.

 

Spring mount mod.

 

Concave is always inwards....CONVEX is an outward curve.

...but I went to school in the 50s, what do I know?

 

i'm planning to do that this weekend also roll my fenders.

 

not flush at all but looks good

 

new pics added. the rears need to go another 1" lower.

 

springmount mod ftw. I'm going 0.6" lower tomorrow.