Your Vehicles As They Sit Now
#1887
New Member
iTrader: (17)
![Default](https://my350z.com/forum/images/icons/icon1.gif)
My first thought was that they are the Strosek side steps (also replicated by Shine), but the Strosek/Shine ones do not go the full length of the side skirt. That's actually why I didn't buy them. The ones here almost look like universal side splitters, but they have a slight bump-out in the front which makes me think they might be made specifically for the Z.
Hopefully it's not something made only in Europe ...
Hopefully it's not something made only in Europe ...
#1888
New Member
![Default](https://my350z.com/forum/images/icons/icon1.gif)
here you go guys........
http://www.aerokit.eu/eng/product.ph...category_id=44
http://www.aerokit.eu/eng/product.php?product_id=110
hope this helps.![Smilie](https://my350z.com/forum/images/smilies/smile.gif)
thanks for your comments
http://www.aerokit.eu/eng/product.ph...category_id=44
http://www.aerokit.eu/eng/product.php?product_id=110
hope this helps.
![Smilie](https://my350z.com/forum/images/smilies/smile.gif)
thanks for your comments
![bowrofl](https://my350z.com/forum/images/smilies/bowrofl.gif)
#1889
New Member
iTrader: (17)
![Default](https://my350z.com/forum/images/icons/icon1.gif)
^ Boooooooooo
Of course, available in Europe only, and not available in carbon fiber! Bahhhhh
Pricing actually isn't that bad - only ~$270 per today's USD-Euro exchange rate. I wonder if they would ship to the US, and for how much haha
How do they mount to the bottom of the car? I'm assuming they use the stock side skirt bolts, but do these pieces wrap up and have a flange that sits flat against the side skirt mounting surface? Or do you have to put some sort of spacers between the side skirt and the part to keep it straight when the bolts are secured?
Of course, available in Europe only, and not available in carbon fiber! Bahhhhh
Pricing actually isn't that bad - only ~$270 per today's USD-Euro exchange rate. I wonder if they would ship to the US, and for how much haha
How do they mount to the bottom of the car? I'm assuming they use the stock side skirt bolts, but do these pieces wrap up and have a flange that sits flat against the side skirt mounting surface? Or do you have to put some sort of spacers between the side skirt and the part to keep it straight when the bolts are secured?
#1890
New Member
![Default](https://my350z.com/forum/images/icons/icon1.gif)
hi my friend,you are correct in the way the fit/mount to the underside of the o/e side skirt.They match perfectly and are moulded to run in the channel where the o/e skirt fixings are.
I found them so easy to fit.Only got them as i thought they looked a little different from the norm.
I found them so easy to fit.Only got them as i thought they looked a little different from the norm.
![Smilie](https://my350z.com/forum/images/smilies/smile.gif)