I finally got my 350z for only $14.96
Trending Topics
#11
Registered User
iTrader: (4)
Originally posted by got_jesus?
The mods are as listed:
.25" drop (springs were taking out hahaha...)
The mods are as listed:
.25" drop (springs were taking out hahaha...)
#13
Registered User
Thread Starter
Join Date: Nov 2003
Location: Texas/DFW/Keller
Posts: 929
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by 35oZephyR
I thought I was the only wierdo that did this to their 1:18 scale cars. I use to reverse the springs on certain models to keep it lowered when you pick em up. I even cut the springs on the MB CLK GT car so it barely glides over the ground at about 1mm.
I thought I was the only wierdo that did this to their 1:18 scale cars. I use to reverse the springs on certain models to keep it lowered when you pick em up. I even cut the springs on the MB CLK GT car so it barely glides over the ground at about 1mm.
#15
Registered User
iTrader: (4)
Originally posted by skippyracer7
So you just take out the spings?
hmmm, Im gonna have to try this. (I also take lots of pictures of my model cars LOL)
So you just take out the spings?
hmmm, Im gonna have to try this. (I also take lots of pictures of my model cars LOL)
Exhaust and turbo blow-off sound effects are up to you!
#16
Registered User
Thread Starter
Join Date: Nov 2003
Location: Texas/DFW/Keller
Posts: 929
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by 35oZephyR
yup...or you can cut the springs in half then pull the remaining spring to it's original height. This makes the springs softer hence lowering the car. This method is useful if you still want to occasionally push the car around without any "rubbing".
Exhaust and turbo blow-off sound effects are up to you!
yup...or you can cut the springs in half then pull the remaining spring to it's original height. This makes the springs softer hence lowering the car. This method is useful if you still want to occasionally push the car around without any "rubbing".
Exhaust and turbo blow-off sound effects are up to you!
you can go to Hobby Lobby and by carbon fiber tape and make a carbon fiber hood....
I am still trying to figure out how to put in the 20g Turbo...