My new track setup!
Joined: Feb 2008
Posts: 13,406
Likes: 130
From: MexiCali dodging potholes
Just doing a road course. First time, so it's more of a learning experience for me. The event can be found here:
http://shift-s3ctor.com/track-info/streets-of-willow/
http://shift-s3ctor.com/track-info/streets-of-willow/
in for pics/vids!
The paint match is spot on, it's just the light and the way the sun is hitting the pearl at certain angles. You should see the car in person, it looks great.
your gonna love the RS3's. what coil/sway set up are you running? settings?
btw try and set up a gopro. and make sure u get their lap timers!
thisis your first event, so just try and get used the tires. you can put a lot of trust into them.
btw try and set up a gopro. and make sure u get their lap timers!
thisis your first event, so just try and get used the tires. you can put a lot of trust into them.
Thread Starter
Registered User
iTrader: (23)
Joined: Apr 2007
Posts: 1,091
Likes: 1
From: Southern California
@f-350z: 
@805350z: Actually, I spun out the first day I mounted the wheels! Not used to how light they are and the tires were still cold. I'm going to add a little more camber to see if that helps. Camber is -1.5 right now, gonna try -2.5 and a corner balance.
@fhumphrey04: It's a base model, so there is no traction control. But I do have a Cusco RS 1.5 way diff that should help a lot!
@SE5spd: Already messed up the sides of the lip on the bottom and there are a couple cracks now, hah
@BrandonSS: As dvo said, the paint is spot on, but I think there's a little more pearl in some spots than Angry Panda had originally put in. Still happy with it!
@FastZ33: Running HKS Hipermax III with Swift Springs, 12k/10k, Cusco sway bars with SPL endlinks, all set to stiffest. Will change the dampening stiffness when I get to the track. Camber is -2.5/-1.5 f/r. Thinking of going -2.5 all around.
I have a GoPro and a Contour Roam, so hopefully I can get some good outside and interior views. I've been hearing nothing but good things about the RS-3's, so I'm pretty excited!
Thanks to all for the compliments!
@805350z: Actually, I spun out the first day I mounted the wheels! Not used to how light they are and the tires were still cold. I'm going to add a little more camber to see if that helps. Camber is -1.5 right now, gonna try -2.5 and a corner balance.
@fhumphrey04: It's a base model, so there is no traction control. But I do have a Cusco RS 1.5 way diff that should help a lot!
@SE5spd: Already messed up the sides of the lip on the bottom and there are a couple cracks now, hah
@BrandonSS: As dvo said, the paint is spot on, but I think there's a little more pearl in some spots than Angry Panda had originally put in. Still happy with it!
@FastZ33: Running HKS Hipermax III with Swift Springs, 12k/10k, Cusco sway bars with SPL endlinks, all set to stiffest. Will change the dampening stiffness when I get to the track. Camber is -2.5/-1.5 f/r. Thinking of going -2.5 all around.
I have a GoPro and a Contour Roam, so hopefully I can get some good outside and interior views. I've been hearing nothing but good things about the RS-3's, so I'm pretty excited!
Thanks to all for the compliments!
Last edited by Ruined Z; Jan 19, 2012 at 01:54 PM.
Thread Starter
Registered User
iTrader: (23)
Joined: Apr 2007
Posts: 1,091
Likes: 1
From: Southern California
Mine came with stickers. Where did you order yours from?
Which wheel did you get? The stickers are usually in a sealed bag on the bottom of the box. Some shops might throw them away without knowing. Mine were in a small sealed green bag.
As far as I know, only Type F and Type C come with stickers. MS1 and SP3 don't come with stickers.
Which wheel did you get? The stickers are usually in a sealed bag on the bottom of the box. Some shops might throw them away without knowing. Mine were in a small sealed green bag.
As far as I know, only Type F and Type C come with stickers. MS1 and SP3 don't come with stickers.
Last edited by Ruined Z; Jan 19, 2012 at 12:01 PM.
Mine came with stickers. Where did you order yours from?
Which wheel did you get? The stickers are usually in a sealed bag on the bottom of the box. Some shops might throw them away without knowing. Mine were in a small sealed green bag.
As far as I know, only Type F and Type C come with stickers. MS1 and SP3 don't come with stickers.
Which wheel did you get? The stickers are usually in a sealed bag on the bottom of the box. Some shops might throw them away without knowing. Mine were in a small sealed green bag.
As far as I know, only Type F and Type C come with stickers. MS1 and SP3 don't come with stickers.
Some shop in Houston, and they told me they didnt come with them. I did get center caps though. I couldn't find any in stock anywhere else and didnt want to wait for SSR.
Thread Starter
Registered User
iTrader: (23)
Joined: Apr 2007
Posts: 1,091
Likes: 1
From: Southern California
@FastZ33: I'll do that! Getting a corner balance tomorrow.
@Ruthless18x: That's strange. It's possible they over looked the bag. But I had to buy center caps.
@gerb: Thanks!
@Ruthless18x: That's strange. It's possible they over looked the bag. But I had to buy center caps.
@gerb: Thanks!
Registered User
Joined: Nov 2009
Posts: 31
Likes: 0
From: Manila
.. dunno what they did, but they didnt use any filler. 
your car looks great!! hoping to get my CS sides soon.
Thread Starter
Registered User
iTrader: (23)
Joined: Apr 2007
Posts: 1,091
Likes: 1
From: Southern California