My new track setup!
#106
New Member
iTrader: (79)
I read this article today; too bad it came out AFTER the track day, it would have been useful to us:
http://www.motoiq.com/magazine_artic...-the-rain.aspx
http://www.motoiq.com/magazine_artic...-the-rain.aspx
#108
Registered User
iTrader: (7)
most recent pic i have. i scrape my sides more than my front lip. exactly what i want not to happen. luckily i raised the rear height another inch this weekend so that helps scraping a little bit. I'm on hipermax III's which i recall you are as well
i installed the skirts at home but I'm sure it's as good as it gets. any higher and the fin on the sides will touch the car
i installed the skirts at home but I'm sure it's as good as it gets. any higher and the fin on the sides will touch the car
#109
Only things I can think of are your camber settings and height. It looks like you put the sides on just fine.
You're definitely lower. I have more wheel gap and I think I'd still have more even with 40 profile tires.
I'm at -2.5 degrees of camber at all 4 corners in this pic.
You're definitely lower. I have more wheel gap and I think I'd still have more even with 40 profile tires.
I'm at -2.5 degrees of camber at all 4 corners in this pic.
Last edited by Ruined Z; 04-18-2012 at 11:48 PM.
#111
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
#113
Registered User
iTrader: (17)
Join Date: Jul 2009
Location: around
Posts: 4,114
Likes: 0
Received 0 Likes
on
0 Posts
I could be wrong since I haven't extentaly looked into it.
#115
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
Usually between -2 and -2.5 for NA cars in the rear depending on the tires , track and driving style.
#118
http://www.speedventures.com/events/...il.aspx?id=379
Speedventures is having an event at Autoclub Speedway, Roval course
Speedventures is having an event at Autoclub Speedway, Roval course
#120
Rubicant, great car. Sorry you got the track bug. There is no cure.
Anyway, could you tell me what size spacers you used front and back. Sorry if you already mentioned it.
Anyway, could you tell me what size spacers you used front and back. Sorry if you already mentioned it.