pyshin's Progress Thread
The struggle is real.
Amazing, but incredibly loud under WOT. The Spintech low-profile chambered muffler is a little farther back than where the stock resonator would be, and that along with stock cats are the only things taming the sound. I've gotten compliments from people who have heard it in person, but I will be purchasing a Motordyne XYZ with resonator down the road the replace the stock HR Y-pipe, their HQ is an hour away from where I live.
Amazing, but incredibly loud under WOT. The Spintech low-profile chambered muffler is a little farther back than where the stock resonator would be, and that along with stock cats are the only things taming the sound. I've gotten compliments from people who have heard it in person, but I will be purchasing a Motordyne XYZ with resonator down the road the replace the stock HR Y-pipe, their HQ is an hour away from where I live.
Welcome King, thanks for having such an extensive build/progress thread of your own... It was awesome to read through; your Silver Alloy Nismo is amazing.
Yeah I've heard nothing but good things about Motordyne, the XYZ is just a beautiful piece. That'll probably be the first purchase after my suspension install and alignment 
Thanks man I appreciate the compliment.
Minor Update:
As I've been waiting patiently for my coils (due later this month)... I've purchased some misc. quality parts:
First I swapped my Aspec goldfish shift **** with a Nismo Titanium piece (thanks flynbrin)
Then a Genuine Works Bell steering wheel hub (thanks Jeff)
Also a JIC Magic strut bar (thanks Rick, definitely does need a good polish)
and a Mishimoto aluminum air diversion plate (Thanks Ryan)
Rare JDM polished harness cover will definitely compliment the bar
Progress!
Minor Update:
As I've been waiting patiently for my coils (due later this month)... I've purchased some misc. quality parts:
First I swapped my Aspec goldfish shift **** with a Nismo Titanium piece (thanks flynbrin)
Then a Genuine Works Bell steering wheel hub (thanks Jeff)
Also a JIC Magic strut bar (thanks Rick, definitely does need a good polish)
and a Mishimoto aluminum air diversion plate (Thanks Ryan)
Rare JDM polished harness cover will definitely compliment the bar
Progress!
Last edited by pyshin; Aug 17, 2016 at 09:59 PM.
Preachin' to the choir... Trust me. Waiting on updates from Stance directly.
As always thanks man
Picked up a Classic Wedge Engineering seat bracket and double-locking sliders, generic side seat mounts, and Sparco seat hardware last night (thanks Jeff)
Recaro SPG and Nardi Classic will hopefully be picked up later this month.
As always thanks man
Picked up a Classic Wedge Engineering seat bracket and double-locking sliders, generic side seat mounts, and Sparco seat hardware last night (thanks Jeff)
Recaro SPG and Nardi Classic will hopefully be picked up later this month.
Joined: Feb 2008
Posts: 13,406
Likes: 130
From: MexiCali dodging potholes
It doesn't and interested in how he mounts his...
also hit graffkid732 for the plug for the wiper delete
sorry OP if I stole your thunder...
Awesome stuff as usual
also hit graffkid732 for the plug for the wiper delete
sorry OP if I stole your thunder...
Awesome stuff as usual
^^^ LOL I just got back from posting on your thread! And thanks again
How did you mount your harness cover? I'm guessing it took a couple small custom brackets mounted along the existing bolt points?
And yeah Mike (graffkid732) is the one who provided me with my rear wiper delete kit; great guy, have and will recommend his services whenever I get the chance. His build is also ridiculous if you have a chance you should check it out if you havn't already radiocrash (https://my350z.com/forum/engine-and-...50z-build.html)
How did you mount your harness cover? I'm guessing it took a couple small custom brackets mounted along the existing bolt points?
And yeah Mike (graffkid732) is the one who provided me with my rear wiper delete kit; great guy, have and will recommend his services whenever I get the chance. His build is also ridiculous if you have a chance you should check it out if you havn't already radiocrash (https://my350z.com/forum/engine-and-...50z-build.html)
Leave me alone Mr. Perfection
Thanks, my friend (who sold them to me) and I along with many others agree with the Silver Allow/SBC combination... I may be wrapping it in vinyl this Spring though.
Got an update from Stance USA... My coils are going to take two more weeks than expected...
In the meantime I purchased this carbon fiber air diversion plate and will modify/dremel it to fit my HR rad support (thanks xirtam)
Got an update from Stance USA... My coils are going to take two more weeks than expected...
In the meantime I purchased this carbon fiber air diversion plate and will modify/dremel it to fit my HR rad support (thanks xirtam)
Last edited by pyshin; Jan 16, 2014 at 09:42 AM.
^^^ LOL I just got back from posting on your thread! And thanks again
How did you mount your harness cover? I'm guessing it took a couple small custom brackets mounted along the existing bolt points?
And yeah Mike (graffkid732) is the one who provided me with my rear wiper delete kit; great guy, have and will recommend his services whenever I get the chance. His build is also ridiculous if you have a chance you should check it out if you havn't already radiocrash (https://my350z.com/forum/engine-and-...50z-build.html)
How did you mount your harness cover? I'm guessing it took a couple small custom brackets mounted along the existing bolt points?
And yeah Mike (graffkid732) is the one who provided me with my rear wiper delete kit; great guy, have and will recommend his services whenever I get the chance. His build is also ridiculous if you have a chance you should check it out if you havn't already radiocrash (https://my350z.com/forum/engine-and-...50z-build.html)
Keep it up Peter, coming along nicely