Robby's Z
#21
Registered User
Thread Starter
#22
Registered User
Thread Starter
New plates ordered and should be here soon
Fitted up a tow strap to the car today. Also relocated the number plate with a couple of brackets to the side.
Fitted up a tow strap to the car today. Also relocated the number plate with a couple of brackets to the side.
#24
Registered User
Thread Starter
Couple of things done to the Z,
Have installed the plenum spacer, test pipes. I had the Y pipe on there but with the test pipes now on it was far too loud. Removed the Y pipe and put the stock one back (still crazy loud) which made it a bit better.
My plastic under tray was shot so put on a metal one which is much better, even has a removable panel to do the oil to save having to take off the whole thing which is nice.
And installed some aftermarket head lights.
Have installed the plenum spacer, test pipes. I had the Y pipe on there but with the test pipes now on it was far too loud. Removed the Y pipe and put the stock one back (still crazy loud) which made it a bit better.
My plastic under tray was shot so put on a metal one which is much better, even has a removable panel to do the oil to save having to take off the whole thing which is nice.
And installed some aftermarket head lights.
Last edited by robbyj; 12-01-2015 at 06:24 PM.
#25
Registered User
Thread Starter
Been busy on the car, finally decided on a color scheme for the car. Wheels are now painted black and teal,
leather seats have been dyed teal, few interior highlights, put mesh on the front bar, changed to LED rear taillights, have also bought a new steering wheel with a short hub and quick release to come. (mainly just to remove the wheel to add an extra level of security after ****** tried to steal the car. Have dipped the door handles black.
leather seats have been dyed teal, few interior highlights, put mesh on the front bar, changed to LED rear taillights, have also bought a new steering wheel with a short hub and quick release to come. (mainly just to remove the wheel to add an extra level of security after ****** tried to steal the car. Have dipped the door handles black.
#27
Registered User
Thread Starter
#29
Registered User
Thread Starter
So have ordered a vortech s/c kit for the z
Going to swap back to the stock front bar (was messed up with stone chips, have started sanding it ready for a repaint), and im going to lower the car a bit with some springs for the moment. then save up for a real suspension set up after the kit gets tuned.
Going to swap back to the stock front bar (was messed up with stone chips, have started sanding it ready for a repaint), and im going to lower the car a bit with some springs for the moment. then save up for a real suspension set up after the kit gets tuned.
Last edited by robbyj; 02-05-2016 at 02:39 AM.
Thread
Thread Starter
Forum
Replies
Last Post