I really just enough to make my 2 - #1's for myself.

Thanks....I can come get it from you on Sat if your around.

 

so maybe 3- 4 inches wide should work?

Sat my son has HS graduation, but I will be in Lewisville area tomorrow. PM your address and I'll stick it in your mailbox.

If you want it wider let me know!

 

The course is posted under the North Texas Autocross Series (NTAXS) group on Facebook. Just click the NTAXS Autocross #3 event.

 

Yes Sir....thank you ! PM'd

 

i will be ordering this week, prob gonna stick to the nitto nt05s for this round.. just make more financial sense right now, with all the things i have going on. still should be a massive improvement over what i have.

 

guys now i'm debating on the rs3, but square setup. i'm on 18x9.5/18x10.5... 265 all around should be good right?

 

For ten extra bucks the rs3 is a better track tire. If you have to drive daily on them there going to wear fast. Not sure about the overall wear on the 05's

 

yeah pulled the trigger. these will not be driven on cept to and from the track, and at the track.. no daily driving on these.

 

Dude...I would go 275 or 285 in the rears with 10.5" rims.

I have 18x9.5's on all 4 corners....If you have 10.5's on the rears and only go 265 for width...you might have some stretch on the back sets.

Talk to Jake or some others about the sizes.

 

jake recommends as big as you can go, he's balla.

no they are going to go on my rota p45r2's now, which are 18x10. i'll be fine with 265's i think.

 

Got registered today, can't wait to slip and slide some more on my all seasons Quite a few G's and Z's on there, should be fun.

 

sweet^^^ more and mroe

i did call and change the rs3's to 285/265....

 

Sorry dude, I am not going to have enough left over to be worth getting it to you. I am going to keep some back just in case I need to replace some numbers.

Call around to some local sign stores if you just want blank stock. Should find some for around 3.50 to 4.00 a square foot.

 

Hey Chris (350) if you want to go in together on some at the same place as Scott I'm down. I can pick some up Friday and just get the $35 minimum - sould be plenty. So just shy of $20 each should do it. I only need to make 6 #s. A pair of 2-3-4 will do everything I want.

I'm in FloMo. Let me know.

 

everyones getting track tires but me

 

With the $35 purchase minimum rule, Scott got 24"x60" for under $40. So, if you divide that by half, it'd be 24"x30" for $20? That sounds like it's more than enough for two.

How would one go about cutting these magnetic sheets anyway (neatly)?

I'm in McKinney.

 

The sheet itself cuts pretty easy with a nice new razor blade/box knife. I changed the blades out after every couple of numbers.

I made patterns using excel and stretching the number onto multiple pages to get the size of number I wanted. Mine are 10 inches high. Print and then cut your numbers out, tape the paper pieces together and get busy.

Good luck!

 

Chris...You can almost cut cut it with scissors...but nice sharp Exacto blade is key !

You gonna be at the 28th AutoX ?

 

I am still unsure at the moment about my attendance on the 28th. If I'm still in TX, you can bet I will be there.

 

X-acto is definitely the only way to fly, and keeping a fresh blade makes it less painful. A little cutting board like this is also nice, otherwise find a table you don't care anything about



They also make for a festive refrigerator decoration