North Texas Autocross Series (NTAXS)
Presented by the North Texas S2000 Owners Club (NTS2KOC)
Saturday, May 28th
Texas Motor Speedway Bus Lot
$40/driver entry fee.
Pre-register at http://www.dlbracing.com starting May 13th.
No on-site registration.
The event is limited to 65 drivers.

You get eight runs at NTAXS events, so you will make four runs in the AM session and four runs in the PM session, with a lunch break in between.

8 AM – 9 AM Check-in, Registration, and mandatory Tech Inspection
(You must arrive in time to check in and pass tech inspection prior to 9 AM)
8:15 AM – 9:30 AM Course open for walking
9:15 AM Novice Meeting (mandatory if new to NTAXS events)
9:30 AM Drivers Meeting (mandatory for all)
9:45 AM First car out
(45-minute lunch break between morning and afternoon heats)

Car Classing is based on engine size:
- Class 1/1R is for engines under 2.3 liters, except Honda S2000 and Lotus
Elise/Exige.
- Class 2/2R is for engines over 2.2 liters, but under 4.0 liters, plus Honda S2000.
- Class 3/3R is for engines over 3.9 liters, plus Lotus Elise/Exige.
- Class S2000 is only for Honda S2000 on street tires.

Rotary engine multiplies displacement by 2.0. Usage of forced induction multiplies displacement by 1.5. (This is in addition to the rotary multiplier, if applicable.) Tires with a wear rating under 140 must use the R class.

View the rules and additional information at http://www.s2000.org/nts2koc/autox.shtml.

Contact me at jrj512 at dfwmx5 dot com for more information.

 

who's registering for this? this will be my last event till I can get some work done on my car... so the 14th and 28th for me.. then maybe a month off. unfortunately, funding makes me go this way...

 

mind if i post thjis on the g35 forum?

 

I will probably go to this one since it is so close for me.

 

Fine with me. Please do.

 

Almost half-full, so register early and register often.

 

registered.... i will have my new tires by then. so excited.

 

registered! Hopefully I can get my HFCs and spacer on by then!

 

Signed up!

 

Son of a Biotch @#&%!* ! Somebody took my number again ! @#&%!

Registered but not happy....I think I'm gonna get a new set of numbers....tired of this happening.

 

I'm in.

Hey EZ, What did you get for tires.

 

Same here. I changed to 12 which is what I did last time with this club. It's always easy to throw up a 1 in front of the 88.

Anyone have a recommended place for magnetic numbers?

 

Talk with Pat...his wife does graphic design and has access to some magnetic stuff...she did Adam's, Pat's, mine...but I had to alter it.

Or in the PCA site there is a link that takes you a Vinyl number place and they magnetic numbers also.

 

Nah I got mine from edecals.com. I wanted numbers by themselves so I can switch them around if needed. My 79 can be 7 or 9 or 97 or 67 or 76....you get the idea.

 

Just started making some new numbers. My first ones were out of to thin of magnetic stock so they blew off easy. Went to Fast Signs in lewisville and purchased some 30 mil blank mag stock to make my own. $7.38 for 12x24, only catch is a $35 min purchase so I had to buy a 24 x 5foot roll.

I can make numbers till the cows come home.

 

Scott, I will have to buy some of your stock so I can make some extra numbers to add on the front or back of my numbers.

Save some for me.....and let me know how much I need to give you for 1- 2 ft. of it ?

 

You got it.

I am going to finish up tomorrow and I'll let you know.

 

^ Can I get in on this? I want a pair of 2 1 3.

 

The cutting is up to you, but if their is enough blank stock left over after Chris gets what he needs I'll let you know.

 

Hey Chris how much do you need for your numbers?

I still have a 23x24 piece left. I am going to keep some extra for additional numbers but I should have plenty if all you need is a couple of numbers.