Ok so i just picked up the new pioneer avhp4200, i have heard of a few ways to bypass the video, anyonene every done it?

 

just ground the parking brake wire...

 

whenyou want to watch the video all you have to do is pull the E-Brake up ONE click and you will be fine...i have the same problem and it works for me

 

+1 easy fix

 

Yea these new systems you can't jut ground the wire also I have heard of just pullin brake one click may go with that, was just wondering if anyone knew any other ways I know about the relay switch and the toggle switch also

 

Heres a DIY for the AvicD3. I know it's not the same but it should be the same idea.

http://avic411.com/forum/viewtopic.php?f=11&t=7998

If not, there should be a DIY somewhere on there.

 

you just have to find the wire that runs into the ebrake.. when you pull the ebrake all it is doing is grounding it. It can be done you just have to be smarter then the stereo

I have done like 4 of these installs and have not had a problem yet