Hey everyone,

So I bought a pair of Project Kics 25mm spacers for my rears. I didn't think I'd need to roll the rear fenders, but literally every time I go over a decent sized bump at more than 35mph my drivers side rear wheel rubs the fender..... I have just been driving with this set up for 20 miles and the rubbing is already eating into the tire, causing little strips of rubber to come off. What do I do?

I have a 2003 G coupe on 19in Axis Milanos, 8.5 all the way around.
Don't know the wheel offsets without the spacers as I bought the car with the wheels on it. Tires are 245/40 all around.


Car with spacers





Tire damage caused by rubbing...

 

yes sir you needa roll them rears asap. i demolished a set of tires with a semi roll on my rears...dont ask either....

 

thats not bad

on getting the fenders rolled ASAP

 

This thread fails, you need to wait at least 24 hours before posting pictures.

 

Haha, I didn't want to get flamed like that other guy who posted the thread about new spacers. I guess you could say I'm prepared.

 

yeah 25mm=roll

 

I have 20mm on the rears of my car.....


Fenders aren't rolled......

 

what size wheels and are you dropped? do you ever rub on your fenders?

 

Nice stance. +1 on posting pics a full 24hrs though... especially if the thread deals with spacers.

 

18" RPF1 w/275 Star Specs.......small drop .8" or so.

 

hellaflush=fail.....why are you running spacers?

 

sitting pretty mike.

 

Clear Stoptechs on front and wanted to widen the track in the rear...

 

Roll fenders

 

I wish my garage was that CLEAN!

Thats a pretty hefty tire, I thought the last time I saw you they were a bit stretched, but it could have been optical illusion. The fronts come with a pre-roll, you could have Elite or Hills roll the back easily.

Are you lowered?

 

PS you need to figure out the offset of those wheels, its blowing my mind that only and 8.5" wide with a 25 spacers is rubbing.

 

Alright well thanks for everyone's help. I guess the only solution would be to roll them fenders. Any reliable place near 21042 or Baltimore area to get the fenders rolled?

 

When I had the wheels off yesterday, I looked on the inside of all wheels and they all said 8.5" on the rims and all tires are 245/40. The previous owner must have had good taste because the wheels themselves are darn near flush without spacers.

Pic of car without spacers

 

hills garage

link in my sig

 

+1, Hills Garage, tell them Michael sent you.

Or LMK when you're up there and i'll roll thru.