KingBaby's Nissan Nismo #0191 'Lin'da'
03-07-2011, 09:36 AM
#141
Hmm....seeing all the progress you've made rod kinda makes me want to work on my nismo to.....BUT....not quite enough....especially not with whats goin to happen with it....maybe a few more months and seeing ur updates i may gain the confidence to actually work on "THE NISMO". Yes i put her on a pedestal....and yes the wife hates it....and yes she is my mistress...<<<<<the Z i mean.
03-07-2011, 09:53 AM
#143
dammit, looks like i need to order a dipstick then....mine's missing so its like the dipstick can pop out at anytime.
Dang dude....i'm looking at the site and I found the STI lenses, but wat else needed to be purchased to make all this happen? Since "carmelo" is the man to see, i'll just buy those products instead for the build.
Dang dude....i'm looking at the site and I found the STI lenses, but wat else needed to be purchased to make all this happen? Since "carmelo" is the man to see, i'll just buy those products instead for the build.
03-07-2011, 10:16 AM
#144
Hardest Setting
Thread Starter
iTrader: (3)
Join Date: Feb 2008
Location: MexiCali dodging potholes
Posts: 13,406
Received 130 Likes
on
102 Posts
Sti lense and halo ring I forgot the size I'll look it up...
Other than that nothing else unless you want special color LEDs you can order those in advance...
Other than that nothing else unless you want special color LEDs you can order those in advance...
03-08-2011, 11:24 PM
#145
Hardest Setting
Thread Starter
iTrader: (3)
Join Date: Feb 2008
Location: MexiCali dodging potholes
Posts: 13,406
Received 130 Likes
on
102 Posts
Ok found time to drive my car, after installing my headlights. If you seen modded headlights you know that a camera can't capture the light well... in person these are bit*ching...
Pics...
Also updated my first page and stole Brandon's mod list layout...
Pics...
Also updated my first page and stole Brandon's mod list layout...
Last edited by KingBaby; 02-27-2012 at 10:39 PM.
03-09-2011, 08:15 PM
#150
Hardest Setting
Thread Starter
iTrader: (3)
Join Date: Feb 2008
Location: MexiCali dodging potholes
Posts: 13,406
Received 130 Likes
on
102 Posts
not stopping...
MOAR...
got my cat inspecting the work...
test pipes feel like nothing...y-pipe a tad heavier than what I imagine...all good work from the eyes view...
floormats...
they (Nissan) must have revised these things (floormats) compared to what came with the car these are way lighter...
MOAR...
got my cat inspecting the work...
test pipes feel like nothing...y-pipe a tad heavier than what I imagine...all good work from the eyes view...
floormats...
they (Nissan) must have revised these things (floormats) compared to what came with the car these are way lighter...
Last edited by KingBaby; 02-27-2012 at 10:39 PM.
03-10-2011, 06:33 PM
#152
Hardest Setting
Thread Starter
iTrader: (3)
Join Date: Feb 2008
Location: MexiCali dodging potholes
Posts: 13,406
Received 130 Likes
on
102 Posts
Ok so I'm dog tired from work/advancement exam/captains cup/Fitness exam...:yuck:
Feel like a$$ but got parts to install!
Stock exhaust clip with mid-pipe resonator delete...
http://www.youtube.com/watch?v=vKhIQ01b2YY
Hopefully I can finished in time but more than likely car gonna be on jacks for a few days...
I'm only Human, so I has a planz to staze awake & relaxed at the same time while I do this...
Feel like a$$ but got parts to install!
Stock exhaust clip with mid-pipe resonator delete...
http://www.youtube.com/watch?v=vKhIQ01b2YY
Hopefully I can finished in time but more than likely car gonna be on jacks for a few days...
I'm only Human, so I has a planz to staze awake & relaxed at the same time while I do this...
Last edited by KingBaby; 02-27-2012 at 10:40 PM.
03-13-2011, 05:15 PM
#155
Hardest Setting
Thread Starter
iTrader: (3)
Join Date: Feb 2008
Location: MexiCali dodging potholes
Posts: 13,406
Received 130 Likes
on
102 Posts
Do I have an update of uncommon knowledge for you guys!
EDIT:
So I did know that muffler are packed with fiberglass and all that. Same with resonators. What I didn't know and maybe must of you guys already knew is. That this fiberglass packing can be burnt out...:WTF: I didn't know that and was shocked to learn that. I know the basic of an exhuast and just of late was researching/reading/youtubing...either way never ran over that knowledge...
NOW you KNOW!
Anyways went to Rad Motorsports a performance shop that was highly recommended over the last shop...Meet the owner and the son. Who has been under instruction from Japanese exhuast builders...titanium welding! YUP he has done two full TI jobs and they ran the buyer $8,900 price range and that's a hook up he said...
So they looked over my car and came to fault for the buzzing and ringing was the stock muffler being dead and having two out of four dead chambers...they wanted me to dump it cause it was done for. I didn't want to they was trying to force a single 3inch setup on me...I opted for a beefier resonator!
car was hot so didn't record anything cause it wouldn't be fair clip and the shop echoed...cause it was pure sex!
PICS!
what's that?
under her skirt!
on a pedastal!
local I-club was there..fcukas broke the dyno...ended up doing road tunes...
homework...$185ish
jumping ship...
EDIT:
So I did know that muffler are packed with fiberglass and all that. Same with resonators. What I didn't know and maybe must of you guys already knew is. That this fiberglass packing can be burnt out...:WTF: I didn't know that and was shocked to learn that. I know the basic of an exhuast and just of late was researching/reading/youtubing...either way never ran over that knowledge...
NOW you KNOW!
Anyways went to Rad Motorsports a performance shop that was highly recommended over the last shop...Meet the owner and the son. Who has been under instruction from Japanese exhuast builders...titanium welding! YUP he has done two full TI jobs and they ran the buyer $8,900 price range and that's a hook up he said...
So they looked over my car and came to fault for the buzzing and ringing was the stock muffler being dead and having two out of four dead chambers...they wanted me to dump it cause it was done for. I didn't want to they was trying to force a single 3inch setup on me...I opted for a beefier resonator!
car was hot so didn't record anything cause it wouldn't be fair clip and the shop echoed...cause it was pure sex!
PICS!
what's that?
under her skirt!
on a pedastal!
local I-club was there..fcukas broke the dyno...ended up doing road tunes...
homework...$185ish
jumping ship...
Last edited by KingBaby; 02-27-2012 at 10:40 PM.
03-13-2011, 05:39 PM
#156
Hey
Can you give me some advice on something. By the way, thanks for the reply on the lights! Yeah, so a rock cracked my front windshield on the Nismo. Anyway, do they still need to remove the A Pillars when putting in the new windshield? THanks!
03-15-2011, 02:44 PM
#160
Hardest Setting
Thread Starter
iTrader: (3)
Join Date: Feb 2008
Location: MexiCali dodging potholes
Posts: 13,406
Received 130 Likes
on
102 Posts
Heading back to the exhaust shop...
On the way I stopped at this weight station...
3240lbs operator said it's within the nearest 20+/- pounds it was flipping between this and 3220...so it was enough over to round up to 40...
EDIT:
this is with 1/16th of gas...
On the way I stopped at this weight station...
3240lbs operator said it's within the nearest 20+/- pounds it was flipping between this and 3220...so it was enough over to round up to 40...
EDIT:
this is with 1/16th of gas...
Last edited by KingBaby; 02-27-2012 at 10:41 PM.