hey, im installing my kit tomm and need instructions for what wire goes to where on my dynotune window/tps box, if anyone can help that would be awesome

 

Hey Why didn't you buy mine?? I know where they go, but I'm not telling J/K ok Here you are:

Blue is to TPS or WOT switch
Green is RPM or Tach input wire
Yellow controls first stage relay
Orange controls second stage relay
White to keyed 12volt source or arming switch
Black is ground

There you be. Now who's your best newest friend?

 

how do they switch between first and second stage/?? a timer or button??

 

Hey JT. I can send you the instructions if you want. Basically it's......

"Both channels have their own seettable ON and OFF points. Each channel also has its own multi-gear lockout feature which allows it to be turned off until you have cycled through the window. The internal TPAS can be configured to prevent the RPMWS channels from activating unless you are at WOT"

Let me know if you want a copy. Geeeezzzz Next thing you know I'll be selling dynotune products!

 

lol i didnt buy yours because it came with the kit i bought, and i need like how to find the pins to tap into, and the blue wire to tap into the wot switch, where does that run, and is it the same as where the zex will have to tap into?

 

https://my350z.com/forum/showthread....or#post2907766

that is how I wired up mine, just without the Zex box

 

that may help, but on the window switch theres 6 wires, so ones power, ones ground, ones rpm, ones tps, and what does channel one and two go to, and how do you find the pins by looking at it under the dash?

 

Channel one goes to the relays that will activate your nitrous & fuel solenoids.

 

so this is pretty much right?

and then i just need to know how to find the pins