Louisiana Z/Import cookout April 29th *Lakefront*
03-03-2009, 01:16 PM
Registered User
iTrader: (17)
Join Date: Aug 2006
Location: Metairie, LA
Posts: 8,541
Likes: 0
Received 0 Likes
on
0 Posts
03-03-2009, 01:16 PM
Registered User
iTrader: (17)
Join Date: Aug 2006
Location: Metairie, LA
Posts: 8,541
Likes: 0
Received 0 Likes
on
0 Posts
03-03-2009, 01:18 PM
Registered User
iTrader: (17)
Join Date: Aug 2006
Location: Metairie, LA
Posts: 8,541
Likes: 0
Received 0 Likes
on
0 Posts
03-03-2009, 01:37 PM
Z-GiRL
iTrader: (7)
Join Date: May 2007
Location: shreveport, la
Posts: 3,677
Likes: 0
Received 0 Likes
on
0 Posts
03-03-2009, 01:44 PM
Registered User
iTrader: (5)
Join Date: Jul 2007
Location: NOLA
Posts: 1,523
Likes: 0
Received 0 Likes
on
0 Posts
just from reading, seems if you use a power bleeder that it takes care of the soft pedal issue. main problem is that the 03-05 have a single piston brake up front and the 06+ have a 2 piston front and a different brake booster. so either swap the booster, which looking at the manual is fairly involved and you need some special tools or get a power bleeder
03-03-2009, 01:45 PM
Registered User
iTrader: (29)
Join Date: Apr 2005
Location: Get out my way pimpin, LA
Posts: 33,731
Likes: 0
Received 1 Like
on
1 Post
just from reading, seems if you use a power bleeder that it takes care of the soft pedal issue. main problem is that the 03-05 have a single piston brake up front and the 06+ have a 2 piston front and a different brake booster. so either swap the booster, which looking at the manual is fairly involved and you need some special tools or get a power bleeder
03-03-2009, 01:56 PM
Registered User
iTrader: (5)
Join Date: Jul 2007
Location: NOLA
Posts: 1,523
Likes: 0
Received 0 Likes
on
0 Posts
BRAKE FLUID
Revision: 2004 December 2005 350Z
Bleeding Brake System AFS000U0
CAUTION:
While bleeding, pay attention to master cylinder fluid level.
1. Turn the ignition switch to the OFF position.
2. Connect a vinyl tube to the rear right bleed valve.
3. Fully depress brake pedal 4 to 5 times.
4. With the brake pedal depressed, loosen the bleed valve to let the air out, and then tighten it immediately.
5. Repeat steps 3, 4 until no more air comes out.
6. Tighten the bleed valve to the specified torque. Refer to BR-25, "Components" ,BR-31, "Component" ,BR-
38, "Components" ,BR-44, "Components" .
7. In steps 2 to 6 below, with the master cylinder reservoir tank filled at least half way, bleed air from the front
left, rear left, and front right tires, in that order.
Revision: 2004 December 2005 350Z
Bleeding Brake System AFS000U0
CAUTION:
While bleeding, pay attention to master cylinder fluid level.
1. Turn the ignition switch to the OFF position.
2. Connect a vinyl tube to the rear right bleed valve.
3. Fully depress brake pedal 4 to 5 times.
4. With the brake pedal depressed, loosen the bleed valve to let the air out, and then tighten it immediately.
5. Repeat steps 3, 4 until no more air comes out.
6. Tighten the bleed valve to the specified torque. Refer to BR-25, "Components" ,BR-31, "Component" ,BR-
38, "Components" ,BR-44, "Components" .
7. In steps 2 to 6 below, with the master cylinder reservoir tank filled at least half way, bleed air from the front
left, rear left, and front right tires, in that order.
03-03-2009, 02:01 PM
Registered User
iTrader: (17)
Join Date: Aug 2006
Location: Metairie, LA
Posts: 8,541
Likes: 0
Received 0 Likes
on
0 Posts