DETROIT Z (meets and events)
#761
Registered User
Join Date: Oct 2007
Location: detroit
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by D350Z10
no you will not need to roll your fender... there are so many threads out there on this stuff.. why doesn't anybody use the search function
Also this is the DETROIT MEETS AND EVENTS thread....
Also this is the DETROIT MEETS AND EVENTS thread....
wow nice burn
#766
Registered User
iTrader: (-1)
Join Date: Mar 2008
Location: Michigan
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by blueper4mancez
i do beat on my car , it's just that i'm too lazy , seriously . let me know the update on your car hopefully it'll be running by then .
#767
Registered User
iTrader: (1)
Join Date: Apr 2006
Location: Novi, Michigan
Posts: 3,078
Likes: 0
Received 0 Likes
on
0 Posts
Tien...Nice stuff.
The tires will fit no problem, I was amazed when Dil told me that 305's probably would fit in there but it would be a bit tighter then you probably want.
HAHAHAH-Yeah right Billy...Denial is the first step my friend.
Felix, can't wait to hear it/see it
Rob-glad you like your exhaust.
The tires will fit no problem, I was amazed when Dil told me that 305's probably would fit in there but it would be a bit tighter then you probably want.
HAHAHAH-Yeah right Billy...Denial is the first step my friend.
Felix, can't wait to hear it/see it
Rob-glad you like your exhaust.
#768
New Member
iTrader: (20)
Originally Posted by blueper4mancez
i do beat on my car , it's just that i'm too lazy , seriously . let me know the update on your car hopefully it'll be running by then .
Well prove it billy and come, being lazy is no excuse... this is gonna be one hell of a time. This is your chance!
#770
New Member
iTrader: (20)
^ Well the clutch issue is all fixed and everything is set. Now just changing out to the Evans NGP+ coolant.
What happend was the flywheel bolts came undone.... and the flywheel wasn't connected to the trans . So Sharif fixed the issue, installed the new ATS TRIPPLE CARBON clutch, new trans (just to be safe) no charge, and now just finishing touches. I am flying down there MAY 2nd to drive it back.
But soon after I am driving back down to Forged and going to ZdayZ with the Forged crew.
What happend was the flywheel bolts came undone.... and the flywheel wasn't connected to the trans . So Sharif fixed the issue, installed the new ATS TRIPPLE CARBON clutch, new trans (just to be safe) no charge, and now just finishing touches. I am flying down there MAY 2nd to drive it back.
But soon after I am driving back down to Forged and going to ZdayZ with the Forged crew.
#772
Registered User
iTrader: (5)
Join Date: Jan 2003
Location: Shelby Twp, Michigan
Posts: 675
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Zminus1
I need some help please the wheels I ordrered are 19x10 in the rear and the tire is a 285/35/19 will it rub or give problems i dont have vdc. and can anyone explain what it means to roll the fenders. cuz i dont wanna
Oh, you should probably also look into a toe and camber kit so your rear wheels are aligned correctly once the new wheels are on and the car is lowered.
Shawn
Last edited by Yancy; 04-22-2008 at 03:43 PM.
#773
Registered User
Join Date: Oct 2007
Location: detroit
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Yancy
I figured someone else would have brought this up, but what offset are you going to be running in the rear? That's more important than the size of the rim or tire. My Z is lowered about 1.2 inches. I have a 19x9.5 rim (offset +24) with toyo T1R 285/30/19 tires. No rub whatsoever. If my offset was say a +20 or lower, the fenders would definately need to be rolled. FYI, the rim sits further to the outside of the car as the offset number gets lower. If its close, you can always try to add some negative camber or take out the spare tire/jack etc from the rear to lose some lbs. Hope this helps bro.
Oh, you should probably also look into a toe and camber kit so your rear wheels are aligned correctly once the new wheels are on and the car is lowered.
Shawn
Oh, you should probably also look into a toe and camber kit so your rear wheels are aligned correctly once the new wheels are on and the car is lowered.
Shawn
the rear is +22.
I was over at street legal cust the other day with zbird, and I inquired about having them do a tien coil over kit. do you know who could put one on for me?
#774
Registered User
iTrader: (12)
Join Date: Aug 2007
Location: Ann Arbor, MI
Posts: 1,972
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Zminus1
thanks Yancy,
the rear is +22.
I was over at street legal cust the other day with zbird, and I inquired about having them do a tien coil over kit. do you know who could put one on for me?
the rear is +22.
I was over at street legal cust the other day with zbird, and I inquired about having them do a tien coil over kit. do you know who could put one on for me?
#775
Registered User
iTrader: (7)
Join Date: Mar 2007
Location: Michigan
Posts: 984
Likes: 0
Received 0 Likes
on
0 Posts
Yes we can do coilovers. A full coilover system, especially the tein's are actually easier and faster to install than lowering springs. You would be very suprised how easy it really is. You will need to get it aligned, but that would need to be done either way. Let me know if you want us to do it. We just finished lowering springs, sway bars, and exhaust system on my car over the weekend.
BTW - I absolutly love the way my car looks and sounds now. I actually had a chance to get on the car a little bit tonight, and the car definatly pulls harder from 3k to redline. Below 3k it has lost a little bit but not nearly as much as I thought it would.
edited spelling for Billy
BTW - I absolutly love the way my car looks and sounds now. I actually had a chance to get on the car a little bit tonight, and the car definatly pulls harder from 3k to redline. Below 3k it has lost a little bit but not nearly as much as I thought it would.
edited spelling for Billy
Last edited by Jonny Boy; 04-22-2008 at 06:20 PM.
#777
Registered User
iTrader: (-1)
Join Date: Mar 2008
Location: Michigan
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Quick video of the exhaust... it's a LOT louder in person... no joke. lol And a couple pics of the spacers on the car, not lowered yet.
http://www.youtube.com/watch?v=EUE6WBQRz9A
http://www.youtube.com/watch?v=EUE6WBQRz9A
Last edited by slowish350z; 04-22-2008 at 08:09 PM.
#778
Registered User
iTrader: (1)
Join Date: Apr 2006
Location: Novi, Michigan
Posts: 3,078
Likes: 0
Received 0 Likes
on
0 Posts
Shawn your info is always at the perfect time. Saw you going towards 75 on Monday at 2:40 in the afternoon on Square Lake. Your car is for sure an eye catcher.
Felix, I am sure we can do it, but if you want a professional to do it thats cool too.. I think you car may be almost as loud as mine now...Sounds healty though.
Friday a High of 79 degrees..sounds like good cruising weather...
Felix, I am sure we can do it, but if you want a professional to do it thats cool too.. I think you car may be almost as loud as mine now...Sounds healty though.
Friday a High of 79 degrees..sounds like good cruising weather...