Minnesota Chat Thread
New Member
Joined: Feb 2011
Posts: 103
Likes: 0
From: St. Louis Park, MN
Well, I guess I will have to say this, do not bring your car, any car, nothing to Wayzata Nissan. Clearly there is an issue with their techs and the service lane. When I bring in my car, the EASIEST problem to fix they failed at and actually made it worseon top of everything. My complaint was that my washer didn't work correctly, they claimed to have Replaced all 3 of my washer nozzles and it is clear that they didn't replace one. They made my driverside nozzle inop, they made my rear nozzle inop and my passanger side works but not very well. The tech wrote in his comments, replaced washer nozzles, but washer pump is weak. I have a warrenty, why would you not replace the pump when there is a CLEAR issue with it. I have an issue with what I susspect to be a bad thermostat because at idle I lose all heat, and they were unable to duplicate it... I can make it do it everytime by just starting it and letting it idle, then rev a little and hey look I get heat. Just everything they did was half assed I am amazed that I did get a new strut but the tech didn't care about my car and streaked his air hose across my freshly detailed car, horray.. And please, if I am out of line please tell me
Tex I'll vouche for the guys at Walser Nissan in Burnsville, very curtious and they have some damn good mechanics..
Greg I don't think I will be able to make it to the hooters deal If you guys are going earlier in the day, I am working until 7
Dave that is pure aids im sowwy.
Oddball I have a friend who made a glass box there for an 8 inch w7 and it sounded really good actually, He took out the glove box on the other side and made an amp rack and i'd say it looked pretty darn good too.
Dave that is pure aids im sowwy.
Oddball I have a friend who made a glass box there for an 8 inch w7 and it sounded really good actually, He took out the glove box on the other side and made an amp rack and i'd say it looked pretty darn good too.
New Member
Joined: Feb 2011
Posts: 103
Likes: 0
From: St. Louis Park, MN
Cool, thank you for the heads up, I was going to go somewhere else, but that would be letting them win. They are going to fix my fix and fit right. I will be speaking to the Service Manager in the morning.
No I got a borla. Saw it on CL yesterday for 500 talked em down to 350 drove to st cloud and picked it up in the frontier came home and threw it in last night after much strenuous activity
I took the Z out for a spin around the block, and no further for fear of death. I think my bleeder's shot cause there's def plenty of air in my lines. I tried do it myself without the bleeder a second time and no go. Looks like I might be actually taking my car to a shop to have the brakes bled. 
New Member
Joined: Feb 2011
Posts: 103
Likes: 0
From: St. Louis Park, MN
I took the Z out for a spin around the block, and no further for fear of death. I think my bleeder's shot cause there's def plenty of air in my lines. I tried do it myself without the bleeder a second time and no go. Looks like I might be actually taking my car to a shop to have the brakes bled.
So I let them sit for the day before I bled them with bleeders open. Then I bled with my shitty hand pump bleeder, then I bled by just pumping the brake and putting the output fluid into a container with the output tube UNDER the brake fluid level in the jar (so air can't suck back in) and it's still shitty, I have to pump several times just for pressure. I'll check for leaks (should have seen some brake fluid somewhere while bleeding) and then see what I can find out. Just a little dissapointed I'm not driving the Z in today's weather. Although, I went downtown on my lunch break and took Hiawatha, and I think they mowed the median cause the road is full of grass and sand. Glad it was the mini taking that on the nose instead.
